Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Altima 2000-2005 Approved Nissan Altima 2002 RSU
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download RSU documenatation <<Text preview - extract from the documentE SUSPENSION
A
SECTION RSU
REAR SUSPENSION
B
C
D
RSU
CONTENTS
PRECAUTIONS ......................................................... 2
. SUSPENSION ARM ............................................. 8 . F
Precautions ............................................................. 2
. RADIUS ROD ....................................................... 9 .
PREPARATION .......................................................... 3
. FRONT LOWER LINK .......................................... 9 .
Commercial Service Tools ....................................... 3 . REAR LOWER LINK AND COIL SPRING ............ 9 . G
NOISE, VIBRATION, AND HARSHNESS (NVH) STABILIZER BAR ................................................. 9 .
TROUBLESHOOTING ............................................... 4 . Inspection .............................................................. 10
.
NVH Troubleshooting Chart .................................... 4 . SHOCK ABSORBER ASSEMBLY ...................... 10 .
H
REAR SUSPENSION ASSEMBLY ............................ 5 . SUSPENSION ARM ........................................... 10 .
Components ............................................................ 5
. FRONT LOWER LINK ........................................ 10 .
On-vehicle Service .................................................. 6
. UPPER RUBBER SEAT AND BUSHING ........... 10 .
Rear Wheel Alignment ............................................ 6 . REAR LOWER LINK AND COIL SPRING .......... 10 . I
PRELIMINARY INSPECTION .............................. 6 . STABILIZER BAR ............................................... 10 .
CAMBER .............................................................. 6
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 11 .
TOE-IN ................................................................. 7
. General Specifications (Rear) ............................... 11 . J
Removal and Installation ......................................... 8 . Rear Wheel Alignment (Unladen*) ........................ 11 .
REAR SUSPENSION ASSEMBLY ...................... 8 . Ball Joint ................................................................ 11
.
SHOCK ABSORBER ........................................... 8 . Wheelarch Height (Unladen*) ................................ 11 .
K
L
M
RSU-1
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions EES000DJ
q When installing each rubber part, final tightening must be
carried out under unladen condition* with tires on ground.
Oil will shorten the life of rubber bushes. Be sure to wipe off
any spilled oil.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack,
hand tools and mats in designated positions.
q Use flare nut wrench when removing or installing brake
tubes.
q After installing removed suspension parts, check wheel
alignment.
q Do not jack up at the trailing arm and lateral link. SBR686C
q Always torque brake lines when installing.
q Lock nuts are unreusable parts; always use new ones.
When replacing, do not wipe the oil off of the new lock nut before tightening.
RSU-2
PREPARATION
PREPARATION PFP:00002
A
Commercial Service Tools EES000DK
Tool name Description
Equivalent to Removing and installing brake piping B
GG94310000 a:10 mm (0.39 in)
1. Flare nut crowfoot
2. Torque wrench C
S-NT360
D
Spring compressor Removing and installing coil spring
RSU
F
NT717
Power tool Loosening bolts and nuts
G
H
PBIC0190E
I
J
K
L
M
RSU-3
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING
NOISE, VIBRATION, AND HARSHNESS (NVH) TROUBLESHOOTING PFP:00003
NVH Troubleshooting Chart EES000DL
Use the following chart to help you find the cause of the symptom. If necessary, repair or replace these parts.
Refer to ROAD WHEEL in this chart.
Refer to SUSPENSION in this chart.
Refer to TIRES in this chart.
RSU-10
RSU-10
RSU-10
RSU-10
RSU-5
RSU-5
RSU-6
FAX-4
FAX-4
WT-3
WT-4
WT-6
WT-6
BR-5
PS-5
--
--
--
--
Reference page
Improper installation, looseness
Shock absorber deformation,
Incorrect wheel alignment
Deformation or damage
Suspension looseness
damage or deflection
Incorrect air pressure
Bushing or mounting
Stabilizer bar fatigue
Parts interference
Incorrect tire size
Uneven tire wear
ROAD WHEEL
DRIVE SHAFT
SUSPENSION
Non-uniformity
Spring fatigue
Out-of-round
STEERING
Imbalance
BRAKES
TIRES
AXLE
Possible Cause and
SUSPECTED PARTS
Noise
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo