Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Frontier 2003-2005 Approved Nissan Frontier 2003 RF

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download RF documenatation <<

Text preview - extract from the document

I BODY

B
SECTION
ROOF C

E
CONTENTS
PRECAUTIONS ......................................................... 2
. SQUEAK AND RATTLE TROUBLE DIAGNOSIS ..... 4 F
Precautions for Supplemental Restraint System Squeak and Rattle Trouble Diagnoses .................... 4 .
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- WORK FLOW ....................................................... 4.
SIONER" ................................................................. 2
. GENERIC SQUEAK AND RATTLE TROUBLE- G
Service Notice ......................................................... 2
. SHOOTING .......................................................... 6
.
PREPARATION .......................................................... 3
. DIAGNOSTIC WORKSHEET ............................... 8 .
Special Service Tools .............................................. 3
. SUNROOF ................................................................ 10
.
H
Commercial Service Tool ........................................ 3 . Removal and Installation ....................................... 10 .

RF-1
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS001DP

The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system may include seat belt switch inputs and dual stage front air bag modules. If
equipped with dual stage front air bag modules, the SRS system uses the seat belt switches to determine the
front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and
whether the front occupants are belted or unbelted. Information necessary to service the system safely is
included in the SRS and SB section of this Service Manual.

The vehicle may be equipped with a passenger air bag deactivation switch. Because no rear seat exists where
a rear-facing child restraint can be placed, the switch is designed to turn off the passenger air bag so that a
rear-facing child restraint can be used in the front passenger seat. The switch is located in the center of the
instrument panel, near the ashtray. When the switch is turned to the ON position, the passenger air bag is
enabled and could inflate for certain types of collision. When the switch is turned to the OFF position, the pas-
senger air bag is disabled and will not inflate. A passenger air bag OFF indicator on the instrument panel lights
up when the passenger air bag is switched OFF. The driver air bag always remains enabled and is not affected
by the passenger air bag deactivation switch.

WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
q The vehicle may be equipped with a passenger air bag deactivation switch which can be operated
by the customer. When the passenger air bag is switched OFF, the passenger air bag is disabled
and will not inflate. When the passenger air bag is switched ON, the passenger air bag is enabled
and could inflate for certain types of collision. After SRS maintenance or repair, make sure the
passenger air bag deactivation switch is in the same position (ON or OFF) as when the vehicle
arrived for service.
Service Notice EIS001DO

q When removing or installing various parts, place a cloth or padding on the vehicle body to prevent
scratches.
q Handle trim, molding, instruments, grille, etc. carefully during removing or installing. Be careful not to soil
or damage them.
q Apply sealing compound where necessary when installing parts.
q When applying sealing compound, be careful that the sealing compound does not protrude from parts.
q When replacing any metal parts (for example body outer panel, members, etc.), be sure to take rust pre-
vention measures.

RF-2
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools EIS001DK

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number B
(Kent-Moore No.) Description
Tool name
-- Locating noise C
(J-39570)
Chassis ear

SIIA0993E
E

-- Repairing the cause of noise F
(J-43980)
NISSAN Squeak and Rattle
Kit
G

SIIA0994E H

RF
Commercial Service Tool EIS001DL

Tool name
(Kent-Moore No.)
Description J

Engine ear Locating noise
(J-39565)
K

L
SIIA0995E

RF-3
SQUEAK AND RATTLE TROUBLE DIAGNOSIS

SQUEAK AND RATTLE TROUBLE DIAGNOSIS PFP:00000

Squeak and Rattle Trouble Diagnoses EIS000Y7

WORK FLOW

ABT488

Customer Interview
Interview the costumer, if possible, to determine the conditions that exist when the noise occurs. Use the Diag-
nostic Worksheet during the interview to document the facts and conditions when the noise occurs and any
customers comments; refer to RF-8, "DIAGNOSTIC WORKSHEET" . This information is necessary to dupli-
cate the conditions that exist when the noise occurs
q The customer may not be able to provide a detail description or location of the noise. Attempt to obtain all
the facts and conditions that exist when the noise occurs (or does not occur).
q If there is more than one noise in the vehicle , be sure to diagnose and repair the noise that the costumer
is concerned about. This can be accomplished by test driving the vehicle with the costumer.
q After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so the customer, service adviser and technician are all speaking the same language when
defining the noise.

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo