Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Primera 2000.2005 Approved Nissan Primera 2005 sb
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download sb documenatation <<
Text preview - extract from the document
SEAT BELTS
H RESTRAINTS
A
B
SECTION
SEAT BELTS C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2
. REMOVAL ............................................................ 3
. F
Precautions for Supplemental Restraint System INSTALLATION .................................................... 3
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- Removal and Installation of Rear Seat Belt ......... .... 4 .
SIONER" ................................................................. 2
. REMOVAL (SEDAN MODELS) ............................ 4 . G
Precaution for Seat Belt Service ............................. 2 . INSTALLATION (SEDAN MODELS) ................ .... 4 .
AFTER A COLLISION .......................................... 2 . REMOVAL (WAGON MODELS) ........................... 4 .
SEAT BELTS ............................................................. 3
. INSTALLATION (WAGON MODELS) ................... 5 .
SB
Removal and Installation of Front Seat Belt ............ 3 .
I
J
K
L
M
SB-1
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EHS000EK
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. Information necessary to service the system safely is included in the SRS and SB section of
this Service Manual.
WARNING:
q To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
q Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
q Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harness connec-
tors.
Precaution for Seat Belt Service EHS000EL
CAUTION:
q Before removing the seat belt pre-tensioner assembly, turn the ignition switch off, disconnect the
battery ground cable and wait at least 3 minutes.
q Do not use electrical test equipment for seat belt pre-tensioner connector.
q After replacing or reinstalling seat belt pre-tensioner assembly, or reconnecting seat belt pre-ten-
sioner connector, check the system function. Refer to SRS-18, "SRS Operation Check" .
q Do not use disassemble buckle or seat belt assembly.
q Replace anchor bolts if they are deformed or worn out.
q Never oil tongue and buckle.
q If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt
assembly.
q If webbing is cut, frayed, or damaged, replace seat belt assembly.
q When replacing seat belt assembly, use a genuine seat belt assembly.
AFTER A COLLISION
WARNING:
Inspect all seat belt assemblies including retractors and attaching hardware after any collision.
NISSAN recommends that all seat belt assemblies in use during a collision be replaced unless the col-
lision was minor and the belts show no damage and continue to operate properly. Failure to do so
could result in serious personal injury in an accident. Seat belt assemblies not in use during a colli-
sion should also be replaced if either damage or improper operation is noted. Seat belt pre-tensioner
should be replaced even if the seat belts are not in use during a frontal collision in which the air bags
are deployed.
Replace any seat belt assembly (including anchor bolts) if:
q The seat belt was in use at the time of a collision (except for minor collisions and the belts, retractors and
buckles show no damage and continue to operate properly).
q The seat belt was damaged in an accident. (i.e. torn webbing, bent retractor or guide, etc.)
q The seat belt attaching point was damaged in an accident. Inspect the seat belt attaching area for damage
or distortion and repair as necessary before installing a new seat belt assembly.
q Anchor bolts are deformed or worn out.
q The seat belt pre-tensioner should be replaced even if the seat belts are not in use during the collision in
which the air bags are deployed.
SB-2
SEAT BELTS
SEAT BELTS PFP:86884
A
Removal and Installation of Front Seat Belt EHS000EM
B
C
D
E
F
MHIA0013E G
CAUTION:
Before servicing SRS, turn the ignition switch off, disconnect the battery ground cable and wait at SB
least 3 minutes.
REMOVAL
1. Remove adjuster cover. I
2. Remove shoulder anchor bolt.
3. Slide the floor anchor cover.
4. Remove floor anchor bolt. J
5. Remove center pillar upper and lower garnish. Refer to EI-25, "Removal and Installation" .
6. Remove pre-tensioner seat belt retractor fixing screws to remove seat belt assembly.
K
7. Remove front seat. Refer to SE-12, "Removal and Installation" .
8. Remove screw, and remove seat cushion inner finisher.
9. Remove anchor bolt to remove seat belt buckle. L
M
SHIA0244E
INSTALLATION
CAUTION:
Before servicing SRS, turn the ignition switch off, disconnect the battery ground cable and wait at
least 3 minutes.
q Install in the reverse order of removal.
SB-3
SEAT BELTS
Removal and Installation of Rear Seat Belt EHS000EN
REMOVAL (SEDAN MODELS)
MHIA0014E
1. Remove rear seat cushion and rear seat back. Refer to SE-17, "Removal and Installation" .
2. Remove rear pillar finisher. Refer to EI-25, "Removal and Installation" .
3. Remove outer anchor and floor anchor bolt.
4. Remove rear parcel shelf finisher. Refer to EI-29, "Removal and Installation" .
5. Remove seat belt retractor mounting screw and anchor bolt, and remove seat belt assembly.
INSTALLATION (SEDAN MODELS)
q Install in the reverse order of removal.
REMOVAL (WAGON MODELS)
MHIA0015E
RH/LH Rear Seat Belt
1. Fold rear seat cushion up.
2. Remove luggage lower finisher. Refer to EI-27, "Removal and Installation (Wagon Models)" .
3. Remove outer anchor and floor anchor bolts.
4. Remove seat belt retractor mounting screw and anchor bolt, and remove the seat belt assembly.
SB-4
SEAT BELTS
Center Rear Seat Belt
1. Fold rear seat cushion up. A
2. Remove anchor bolts securing center seat belt retractor.
3. Remove rear seatback. Refer to SE-12, "Removal and Installation" .
B
4. Remove rear seatback board.
5. Remove rear center armrest.
6. Remove hog ring securing upper portion of rear seatback trim.
C
7. Remove rear seat belt retractor.
INSTALLATION (WAGON MODELS)
q Install in the reverse order of removal. D
E
F
G
SB
I
J
K
L
M
SB-5
SEAT BELTS
SB-6
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo