Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Sentra 2000-2005 Approved Nissan Sentra 2005 ACC
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<
Text preview - extract from the document
B ENGINE
A
ACC
SECTION
ACCELERATOR CONTROL SYSTEM C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 3 . F
Removal and Installation ......................................... 2
. Accelerator Control .................................................. 3
.
REMOVAL ............................................................ 2
. PEDAL TRAVEL ................................................... 3
.
INSTALLATION .................................................... 2
. G
H
I
J
K
L
M
Revision: July 2005 ACC-1 2005 Sentra
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Removal and Installation EBS00DTP
REMOVAL
1. Disconnect the accelerator pedal position sensor electrical con-
nector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor.
LBIA0333E
2. Remove the two upper and one lower accelerator pedal assem-
bly nuts.
WBIA0520E
3. Remove the accelerator pedal assembly.
q For electrical inspection of the accelerator pedal position sensor. Refer to EC-573, "DTC P2122, P2123
APP SENSOR" and EC-580, "DTC P2127, P2128 APP SENSOR" (QG18DE) or EC-1284, "DTC
P2122, P2123 APP SENSOR" and EC-1291, "DTC P2127, P2128 APP SENSOR" (QR25DE).
CAUTION:
q Do not disassemble the accelerator pedal assembly. Do not remove the accelerator pedal posi-
tion sensor from the accelerator pedal assembly.
q Avoid impact from dropping the accelerator pedal assembly during handling.
q Keep the accelerator pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
q Check the accelerator pedal for smooth operation. There should
be no binding or sticking when applying or releasing the acceler-
ator pedal.
q Check that the accelerator pedal moves through the full speci-
fied distance of the specified pedal travel "A".
Pedal Travel "A" : 52.6 - 58.2 mm (2.07 - 2.29 in)
CAUTION:
When the accelerator pedal position sensor harness connector
is disconnected, perform the "Accelerator Pedal Released Posi- LBIA0062E
tion Learning". Refer to EC-749, "Accelerator Pedal Released
Position Learning" .
Revision: July 2005 ACC-2 2005 Sentra
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
A
Accelerator Control EBS00EWA
PEDAL TRAVEL
ACC
C
D
LBIA0062E E
Accelerator pedal - total travel "A" 52.6 - 58.2 mm (2.07 - 2.29 in)
F
G
H
I
J
K
L
M
Revision: July 2005 ACC-3 2005 Sentra
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: July 2005 ACC-4 2005 Sentra
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo