Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Sentra 2000-2005 Approved Nissan Sentra 2005 FSU

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
FSU

>> Download FSU documenatation <<

Text preview - extract from the document

E SUSPENSION

B
SECTION
FRONT SUSPENSION C

FSU
CONTENTS
PRECAUTIONS ......................................................... 2 . Disassembly ............................................................ 9
. F
Precautions ............................................................. 2
. Inspection ................................................................ 9
.
PREPARATION .......................................................... 3. SHOCK ABSORBER ASSEMBLY ........................ 9 .
Special Service Tools .............................................. 3 . MOUNTING INSULATOR AND RUBBER PARTS 10 ... G
Commercial Service Tools ....................................... 3 . THRUST BEARING ............................................ 10 .
NOISE, VIBRATION, AND HARSHNESS (NVH) COIL SPRING .................................................... 10 .
TROUBLESHOOTING ............................................... 4 . Assembly ............................................................... 10
.
H
NVH Troubleshooting Chart .................................... 4 . STABILIZER BAR .................................................... 11 .
FRONT SUSPENSION ASSEMBLY .......................... 5 . Removal and Installation ....................................... 11 .
Components ............................................................ 5
. TRANSVERSE LINK AND LOWER BALL JOINT ... 13
On-Vehicle Service .................................................. 6. Removal and Installation ....................................... 13 . I
Front Wheel Alignment ............................................ 6 . Inspection .............................................................. 13
.
PRELIMINARY INSPECTION .............................. 7 . TRANSVERSE LINK .......................................... 13 .
CAMBER, CASTER AND KINGPIN INCLINA- LOWER BALL JOINT ......................................... 14 . J
TION ..................................................................... 7
. SERVICE DATA AND SPECIFICATIONS (SDS) ..... 15 .
TOE-IN ................................................................. 7
. General Specifications (Front) ............................... 15 .
FRONT WHEEL TURNING ANGLE .................... 8 . Front Wheel Alignment (Unladen*1) ...................... 15 .
K
COIL SPRING AND SHOCK ABSORBER ................ 9 . Lower Ball Joint ..................................................... 15
.
Removal and Installation ......................................... 9 . Wheelarch Height (Unladen*) ................................ 16 .

Revision: July 2005 FSU-1 2005 Sentra
PRECAUTIONS

PRECAUTIONS PFP:00001

Precautions EES000IB

q When installing rubber parts, final tightening must be car-
ried out under unladen condition* with tires on ground.
Oil will shorten the life of rubber bushings. Be sure to wipe
off any spilled oil.
*: Fuel, radiator coolant and engine oil full. Spare tire, jack,
hand tools and mats in designated positions.
q After installing removed suspension parts, check wheel
alignment and adjust if necessary.
q Use flare nut wrench when removing or installing brake
tubes.
q Always torque brake lines when installing. SBR686C

q Lock nuts are unreusable parts; always use new ones.
When replacing, do not wipe the oil off the new lock nut before tightening.

Revision: July 2005 FSU-2 2005 Sentra
PREPARATION

PREPARATION PFP:00002
A
Special Service Tools EES000IC

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number
B
(Kent-Moore No.) Description
Tool name
HT72520000 Removing tie-rod outer end and lower ball
(J25730-B) joint C
Ball joint remover

NT146

FSU
Commercial Service Tools EES000ID

Tool name Description
Attachment wheel alignment Measure wheel alignment F
a: Screw M24 x 1.5 pitch
b: 35 mm (1.38 in) dia.
c: 65 mm (2.56 in) dia.
d: 56 mm (2.20 in) G
e: 12 mm (0.47 in)

NT148
H
Equivalent to GG94310000 Removing and installing brake piping
1 Flare nut crowfoot a: 10 mm (0.39 in)
2 Torque wrench
I

S-NT360
J
Spring compressor Removing and installing coil spring

L
NT717

Revision: July 2005 FSU-3 2005 Sentra
PARTS

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo