Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Sentra 2000-2005 Approved Nissan Sentra 2000 fwd
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download fwd documenatation <<
Text preview - extract from the document
Edition: January 2000 QUICK REFERENCE INDEX
Revision: November 2000
Publication No. SM0E-1B15U2
All rights reserved. No part of this Service Manual may
be reproduced or stored in a retrieval system, or
transmitted in any form, or by any means, electronic,
mechanical, photo-copying, recording or otherwise,
without the prior written permission of Nissan North
America, Inc., Gardena, California.
FOREWORD
This manual contains maintenance and repair procedures for the
2000 NISSAN SENTRA.
In order to assure your safety and the efficient functioning of the
vehicle, this manual should be read thoroughly. It is especially
important that the PRECAUTIONS in the GI section be completely
understood before starting any repair task.
All information in this manual is based on the latest product infor-
mation at the time of publication. The right is reserved to make
changes in specifications and methods at any time without notice.
IMPORTANT SAFETY NOTICE
The proper performance of service is essential for both the safety of
the technician and the efficient functioning of the vehicle.
The service methods in this Service Manual are described in such a
manner that the service may be performed safely and accurately.
Service varies with the procedures used, the skills of the technician
and the tools and parts available. Accordingly, anyone using service
procedures, tools or parts which are not specifically recommended
by NISSAN must first be completely satisfied that neither personal
safety nor the vehicle's safety will be jeopardized by the service
method selected.
NISSAN NORTH AMERICA, INC.
Technical Publications Department
Gardena, California
PLEASE HELP MAKE THIS SERVICE MANUAL BETTER!
Your comments are important to NISSAN and will help us to improve our Service Manuals.
Use this form to report any issues or comments you may have regarding our Service Manuals.
Please print this form and type or write your comments below. Mail or fax to:
Nissan North America, Inc.
Technical Service Information
39001 Sunrise Drive, P.O. Box 9200
Farmington Hills, MI USA 48331
FAX: (248) 488-3910
SERVICE MANUAL: Model: Year:
PUBLICATION NO. (Please photocopy back cover):
VEHICLE INFORMATION VIN: Production Date:
Please describe any issues or problems in detail:
Page number(s) Note: Please include a copy of each page, marked with your comments.
Are the trouble diagnosis procedures logical and easy to use? (circle your answer) YES NO
If no, what page number(s)? Note: Please include a copy of each page, marked with your comments.
Please describe the issue or problem in detail:
Is the organization of the manual clear and easy to follow? (circle your answer) YES NO
Please comment:
What information should be included in NISSAN Service Manuals to better support you in servicing or
repairing customer vehicles?
DATE: YOUR NAME: POSITION:
DEALER: DEALER NO.: ADDRESS:
CITY: STATE/PROV./COUNTRY: ZIP/POSTAL CODE:
NOTES
QG18DE (Except CALIF. CA) Attachment No.13
TEST VALUE AND TEST LIMIT (GST ONLY -- NOT APPLICABLE TO CONSULT-II)
The following is the information specified in Mode 6 of SAE J1979.
The test value is a parameter used to determine whether a system/circuit diagnostic test is "OK" or "NG" while
being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the
maximum or minimum value and is compared with the test value being monitored.
Items for which these data (test value and test limit) are displayed are the same as SRT code items.
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID) and can be dis-
played on the GST screen.
Test value
SRT item Self-diagnostic test item DTC (GST display) Test limit Conversion
TID CID
P0420 01H 01H Max. 1/128
Three way catalyst function (Bank 1)
P0420 02H 81H Min. 1
CATALYST
P0430 03H 02H Max. 1/128
Three way catalyst function (Bank 2)
P0430 04H 82H Min. 1
P0440 05H 03H Max. 1/128mm2
EVAP control system (Small leak)
P1440 05H 03H Max. 1/128mm2
EVAP SYSTEM
EVAP control system purge flow monitoring P1447 06H 83H Min. 20mV
EVAP control system (Very small leak) P1441 07H 03H Max. 1/128mm2
P0133 09H 04H Max. 16ms
P0131 0AH 84H Min. 10mV
Heated oxygen sensor 1 (Bank 1) P0130 0BH 04H Max. 10mV
P0132 0CH 04H Max. 10mV
P0134 0DH 04H Max. 1s
P0153 11H 05H Max. 16ms
P0151 12H 85H Min. 10mV
Heated oxygen sensor 1 (Bank 2) P0150 13H 05H Max. 10mV
P0152 14H 05H Max. 10mV
HO2S
P0154 15H 05H Max. 1s
P0139 19H 86H Min. 10mV/500ms
P0137 1AH 86H Min. 10mV
Heated oxygen sensor 2 (Bank 1)
P0140 1BH 06H Max. 10mV
P0138 1CH 06H Max. 10mV
P0159 21H 87H Min. 10mV/500ms
P0157 22H 87H Min. 10mV
Heated oxygen sensor 2 (Bank 2)
P0160 23H 07H Max. 10mV
P0158 24H 07H Max. 10mV
P0135 29H 08H Max. 20mV
Heated oxygen sensor 1 heater (Bank 1)
P0135 2AH 88H Min. 20mV
P0155 2BH 09H Max. 20mV
Heated oxygen sensor 1 heater (Bank 2)
P0155 2CH 89H Min. 20mV
HO2S HTR
P0141 2DH 0AH Max. 20mV
Heated oxygen sensor 2 heater (Bank 1)
P0141 2EH 8AH Min. 20mV
P0161 2FH 0BH Max. 20mV
Heated oxygen sensor 2 heater (Bank 2)
P0161 30H 8BH Min. 20mV
P0400 31H 8CH Min. 1
P0400 32H 8CH Min. 1
EGR SYSTEM EGR function P0400 33H 8CH Min. 1
P0400 34H 8CH Min. 1
P1402 35H 0CH Max. 1
QG18DE (CALIF. CA) Attachment No.14
TEST VALUE AND TEST LIMIT (GST ONLY -- NOT APPLICABLE TO CONSULT-II)
The following is the information specified in Mode 6 of SAE J1979.
The test value is a parameter used to determine whether a system/circuit diagnostic test is "OK" or "NG" while
being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the
maximum or minimum value and is compared with the test value being monitored.
Items for which these data (test value and test limit) are displayed are the same as SRT code items.
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID) and can be dis-
played on the GST screen.
Test value
SRT item Self-diagnostic test item DTC (GST display) Test limit Conversion
TID CID
P0420 01H 01H Max. 1/128
CATALYST Three way catalyst function
P0420 02H 81H Max. 1
P0440 05H 03H Max. 1/128mm2
EVAP control system (Small leak)
EVAP SYSTEM P1440 05H 03H Max. 1/128mm2
EVAP control system purge flow monitoring P1447 06H 83H Min. 20mV
P1273 43H 0EH Max. 0.002
A/F sensor 1 P1274 44H 8EH Min. 0.002
P1275 45H 8EH Min. 0.004
P0139 19H 86H Min. 10mV/500ms
P0137 1AH 86H Min. 10mV
Heated oxygen sensor 2
HO2S P0140 1BH 06H Max. 10mV
P0138 1CH 06H Max. 10mV
P0145 61H 92H Min. 10mV/500ms
P0144 62H 92H Min. 10mV
Heated oxygen sensor 3
P0143 63H 12H Max. 10mV
P0146 64H 12H Max. 10mV
P1277 57H 04H Max. 5mV
A/F sensor 1 heater
P1277 58H 04H Min. 5mV
P0141 2DH 0AH Max. 20mV
HO2S HTR Heated oxygen sensor 2 heater
P0141 2EH 8AH Min. 20mV
P0147 71H 14H Max. 20mV
Heated oxygen sensor 3 heater
P0147 72H 94H Min. 20mV
P0400 31H 8CH Min. 1
P0400 32H 8CH Min. 1
EGR SYSTEM EGR function P0400 33H 8CH Min. 1
P0400 34H 8CH Min. 1
P1402 35H 0CH Max. 1
SR20DE Attachment No.15
TEST VALUE AND TEST LIMIT (GST ONLY -- NOT APPLICABLE TO CONSULT-II)
The following is the information specified in Mode 6 of SAE J1979.
The test value is a parameter used to determine whether a system/circuit diagnostic test is "OK" or "NG" while
being monitored by the ECM during self-diagnosis. The test limit is a reference value which is specified as the
maximum or minimum value and is compared with the test value being monitored.
Items for which these data (test value and test limit) are displayed are the same as SRT code items.
These data (test value and test limit) are specified by Test ID (TID) and Component ID (CID) and can be dis-
played on the GST screen.
Test value
SRT item Self-diagnostic test item DTC (GST display) Test limit Conversion
TID CID
P0420 01H 01H Max. 1/128
CATALYST Three way catalyst function
P0420 02H 81H Min. 1
P0440 05H 03H Max. 1/128mm2
EVAP control system (Small leak)
EVAP SYSTEM P1440 05H 03H Max. 1/128mm2
EVAP control system purge flow monitoring P1447 06H 83H Min. 20mV
P0133 09H 04H Max. 16ms
P0131 0AH 84H Min. 10mV
Heated oxygen sensor 1 P0130 0BH 04H Max. 10mV
P0132 0CH 04H Max. 10mV
HO2S P0134 0DH 04H Max. 1s
P0139 19H 86H Min. 10mV/500ms
P0137 1AH 86H Min. 10mV
Heated oxygen sensor 2
P0140 1BH 06H Max. 10mV
P0138 1CH 06H Max. 10mV
P0135 29H 08H Max. 20mV
Heated oxygen sensor 1 heater
P0135 2AH 88H Min. 20mV
HO2S HTR
P0141 2DH 0AH Max. 20mV
Heated oxygen sensor 2 heater
P0141 2EH 8AH Min. 20mV
P0400 31H 8CH Min. 1
P0400 32H 8CH Min. 1
EGR SYSTEM EGR function P0400 33H 8CH Min. 1
P0400 34H 8CH Min. 1
P1402 35H 0CH Max. 1
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo