Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Sentra 2000-2005 Approved Nissan Sentra 2003 ACC
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<
Text preview - extract from the document
B ENGINE
A
ACC
SECTION
ACCELERATOR CONTROL SYSTEM C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . F
Removal and Installation ......................................... 2
. Accelerator Control .................................................. 4
.
PEDAL TRAVEL ................................................... 4
.
G
H
I
J
K
L
M
ACC-1
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Removal and Installation EBS00DTP
1. Disconnect the accelerator pedal position sensor electrical con-
nector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor.
LBIA0075E
2. Remove the upper and lower pedal assembly nuts.
LBIA0060E
3. Remove the pedal assembly.
q For electrical inspection of the accelerator pedal position sensor. Refer to EC-501, "DTC P2122, P2123
APP SENSOR" (QG18DE ULEV), EC-1113, "DTC P2122, P2123 APP SENSOR" (QG18DE SULEV)
or EC-1735, "DTC P2122, P2123 APP SENSOR" (QR25DE).
CAUTION:
q Do not disassemble the pedal assembly. Do not remove the accelerator pedal position sensor
from the pedal assembly.
q Avoid impact from dropping during handling.
q Keep the pedal assembly away from water.
ACC-2
ACCELERATOR CONTROL SYSTEM
4. Installation is in the reverse order of removal.
q Check the accelerator pedal for smooth operation. There A
should be no binding or sticking when applying or releasing
the accelerator pedal.
ACC
C
LBIA0061E
D
q Check that the accelerator pedal moves through the full spec-
ified distance of pedal travel.
E
Pedal Travel "A" : 52.6 - 58.2 mm (2.07 - 2.29 in)
F
G
LBIA0062E
CAUTION: H
When the harness connector of the accelerator pedal position sensor is disconnected, perform
the "Accelerator Pedal Released Position Learning". Refer to EC-1239, "Accelerator Pedal
Released Position Learning" . I
J
K
L
M
ACC-3
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Accelerator Control EBS00EWA
PEDAL TRAVEL
Accelerator control pedal - total travel 52.6 - 58.2 mm (2.07 - 2.29 in)
ACC-4
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo