Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Titan 2004-2009 Approved Nissan Titan 2009 SEC
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download SEC documenatation <<
Text preview - extract from the document
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
SEC
A
B
SECTION
SECURITY CONTROL SYSTEM C
D
E
CONTENTS
BASIC INSPECTION ................................... 3
. THEFT ALM : CONSULT-III Function (BCM - F
THEFT ALM) ..........................................................14
.
DIAGNOSIS AND REPAIR WORKFLOW ......... 3
.
Work Flow ................................................................ 3
. COMPONENT DIAGNOSIS ........................ 15
. G
INSPECTION AND ADJUSTMENT .................... 6
. U1000 CAN COMM CIRCUIT ........................... 15
Description ..............................................................15
.
ADDITIONAL SERVICE WHEN REPLACING DTC Logic ...............................................................15
. H
CONTROL UNIT ......................................................... 6
. Diagnosis Procedure ..............................................15 .
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT : Special Repair Requirement ...... 6 U1010 CONTROL UNIT (CAN) ......................... 16
I
Description ..............................................................16
.
ECM RE-COMMUNICATING FUNCTION .................. 6 . DTC Logic ...............................................................16
.
ECM RE-COMMUNICATING FUNCTION : De- Diagnosis Procedure ..............................................16 .
scription .................................................................... 6
. Special Repair Requirement ...................................16 . J
ECM RE-COMMUNICATING FUNCTION : Spe-
cial Repair Requirement ........................................... 6 . B2190, P1614 NATS ANTENNA AMP. ............ 17
Description ..............................................................17
. SEC
FUNCTION DIAGNOSIS .............................. 7
. DTC Logic ...............................................................17
.
Diagnosis Procedure ..............................................17 .
NVIS (NISSAN VEHICLE IMMOBILIZER SYS-
TEM-NATS) ........................................................ 7
. B2191, P1615 DIFFERENCE OF KEY ............. 20 L
System Diagram ....................................................... 7
. Description ..............................................................20
.
System Description .................................................. 7
. DTC Logic ...............................................................20
.
Component Parts Location ....................................... 8
. Diagnosis Procedure ..............................................20 . M
Component Description ........................................... 9
.
B2192, P1611 ID DISCORD, IMMU-ECM ......... 21
VEHICLE SECURITY SYSTEM ........................10
. Description ..............................................................21
.
System Diagram ..................................................... 10
. DTC Logic ...............................................................21
. N
System Description ................................................ 10
. Diagnosis Procedure ..............................................21 .
Component Parts Location ..................................... 11
.
Component Description .......................................... 12
. B2193, P1612 CHAIN OF ECM-IMMU .............. 23 O
Description ..............................................................23
.
DIAGNOSIS SYSTEM (BCM) ...........................13
. DTC Logic ...............................................................23
.
Diagnosis Procedure ..............................................23 .
COMMON ITEM ........................................................ 13
. P
COMMON ITEM : CONSULT-III Function (BCM - P1610 LOCK MODE ......................................... 24
COMMON ITEM) .................................................... 13
. Description ..............................................................24
.
IMMU ......................................................................... 13
. DTC Logic ...............................................................24
.
IMMU : CONSULT-III Function (BCM - IMMU) ...... 13 . Diagnosis Procedure ..............................................24 .
THEFT ALM .............................................................. 14
. POWER SUPPLY AND GROUND CIRCUIT .... 25
Revision: November 2008 SEC-1 2009 Titan
BCM .......................................................................... 25
. DTC Index ............................................................. 56
.
BCM : Diagnosis Procedure .................................. 25 .
IPDM E/R (INTELLIGENT POWER DISTRI-
KEY CYLINDER SWITCH ................................ 26
. BUTION MODULE ENGINE ROOM) ................ 58
.
Reference Value .................................................... 58.
KING CAB ................................................................ 26
. Terminal Layout ..................................................... 60
.
KING CAB : Description ........................................ 26 . Physical Values ...................................................... 60
.
KING CAB : Component Function Check .............. 26 . Fail Safe ................................................................ 63
.
KING CAB : Diagnosis Procedure ......................... 26 . DTC Index ............................................................. 64
.
CREW CAB .............................................................. 27
.
CREW CAB : Description ...................................... 28 .
SYMPTOM DIAGNOSIS ............................ 66
CREW CAB : Component Function Check ............ 28 . VEHICLE SECURITY SYSTEM SYMPTOMS ... 66
CREW CAB : Diagnosis Procedure ....................... 28 . Symptom Table ...................................................... 66
.
HORN FUNCTION ............................................ 30
. NISSAN VEHICLE IMMOBILIZER SYSTEM-
Description ............................................................. 30
. NATS SYMPTOMS ........................................... 67
.
Component Function Check ................................ 30 .
Symptom Table ...................................................... 67
.
Diagnosis Procedure ............................................ 30 .
ON-VEHICLE MAINTENANCE .................. 68
VEHICLE SECURITY INDICATOR ................... 32
.
Description ............................................................. 32
. PRE-INSPECTION FOR DIAGNOSTIC ........... 68
.
Component Function Check ................................ 32 . Basic Inspection ..................................................... 68
.
Diagnosis Procedure ............................................. 32 .
PRECAUTION ............................................ 69
ECU DIAGNOSIS ....................................... 34
.
PRECAUTIONS ................................................ 69
.
BCM (BODY CONTROL MODULE) ................. 34
. Precaution for Supplemental Restraint System
Reference Value .................................................... 34. (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
Terminal Layout ..................................................... 36
. SIONER" ................................................................ 69
.
Physical Values ..................................................... 36
.
Wiring Diagram - VEHICLE SECURITY SYSTEM... 42 ON-VEHICLE REPAIR ............................... 70
Wiring Diagram - NVIS - ........................................ 51 .
Fail Safe ................................................................ 55
. VEHICLE SECURITY SYSTEM ........................ 70
.
DTC Inspection Priority Chart ............................. 56 . Removal and Installation ........................................ 70
.
Revision: November 2008 SEC-2 2009 Titan
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
BASIC INSPECTION A
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow INFOID:0000000003789194
B
OVERALL SEQUENCE
C
D
E
F
G
H
I
J
SEC
L
M
N
O
P
ALKIA0538GB
DETAILED FLOW
Revision: November 2008 SEC-3 2009 Titan
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
1.GET INFORMATION FOR SYMPTOM
Get the detailed information from the customer about the symptom (the condition and the environment when
the incident/malfunction occurred).
>> GO TO 2.
2.CHECK DTC
1. Check BCM for DTCs.
2. Perform the following procedure if DTC is displayed.
- Erase DTC.
- Study the relationship between the cause detected by DTC and the symptom described by the customer.
3. Check related service bulletins for information.
Is any symptom described and any DTC detected?
Symptom is described, DTC is displayed>>GO TO 3.
Symptom is described, DTC is not displayed>>GO TO 4.
Symptom is not described, DTC is displayed>>GO TO 5.
3.CONFIRM THE SYMPTOM
Confirm the symptom described by the customer.
Connect CONSULT-III to the vehicle in "DATA MONITOR" mode and check real-time diagnosis results.
Verify relation between the symptom and the condition when the symptom is detected.
>> GO TO 5.
4.CONFIRM THE SYMPTOM
Confirm the symptom described by the customer.
Connect CONSULT-III to the vehicle in "DATA MONITOR " mode and check real-time diagnosis results.
Verify relation between the symptom and the condition when the symptom is detected.
>> GO TO 6.
5.PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC Confirmation Procedure for the displayed DTC, and then check that DTC is detected again.
If two or more DTCs are detected, refer to SEC-56, "DTC Inspection Priority Chart" (BCM) and determine
trouble diagnosis order.
Is DTC detected?
YES >> GO TO 8.
NO >> Refer to GI-38, "Intermittent Incident".
6.PERFORM BASIC INSPECTION
Perform Basic Inspection. Refer to SEC-68, "Basic Inspection".
>> GO TO 7.
7.DETECT MALFUNCTIONING SYSTEM BY SYMPTOM TABLE
Detect malfunctioning system according to Symptom Table based on the confirmed symptom in step 4.
>> GO TO 8.
8.DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE
Inspect according to Diagnostic Procedure of the system.
NOTE:
The Diagnostic Procedure is described based on open circuit inspection. A short circuit inspection is also
required for the circuit check in the Diagnostic Procedure.
>> GO TO 9.
Revision: November 2008 SEC-4 2009 Titan
DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
9.REPAIR OR REPLACE THE MALFUNCTIONING PART A
1. Repair or replace the malfunctioning part.
2. Reconnect parts or connectors disconnected during Diagnostic Procedure again after repair and replace-
ment.
B
3. Check DTC. If DTC is displayed, erase it.
>> GO TO 10.
C
10.FINAL CHECK
When DTC was detected in step 9, perform DTC Confirmation Procedure or Component Function Check
again, and then check that the malfunctions have been fully repaired. D
When symptom was described by the customer, refer to the confirmed symptom in step 3 or 4, and check that
the symptom is not detected.
Does the symptom reappear? E
YES (DTC is detected)>>GO TO 8.
YES (Symptom remains)>>GO TO 6.
NO >> INSPECTION END F
G
H
I
J
SEC
L
M
N
O
P
Revision: November 2008 SEC-5 2009 Titan
INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Re-
quirement INFOID:0000000003789195
Refer to CONSULT-III Operation Manual.
ECM RE-COMMUNICATING FUNCTION
ECM RE-COMMUNICATING FUNCTION : Description INFOID:0000000003789196
Performing following procedure can automatically perform re-communication of ECM and BCM, but only when
the ECM has been replaced with a new one (*1).
*1: New one means an ECM which has never been energized on-board.
(In this step, initialization procedure by CONSULT-III is not necessary)
NOTE:
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo