Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Titan 2004-2009 Approved Nissan Titan 2009 WT

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
WT


>> Download WT documenatation <<

Text preview - extract from the document
SUSPENSION




                                                                                                                          WT
                                                                                                                                                                  A


                                                                                                                                                                  B
                                                                                              SECTION
                                                                                  ROAD WHEELS & TIRES                                                             C


                                                                                                                                                                  D


                                                                                                                                                                  WT
                                                                 CONTENTS
BASIC INSPECTION ................................... 3
                                                .                                  Special Repair Requirement ...................................18
                                                                                                                                             .                    F

DIAGNOSIS AND REPAIR WORKFLOW ......... 3
                                  .                                              C1729 VEHICLE SPEED SIGNAL .................... 19
  Repair Work Flow ..................................................... 3
                                                                  .                Description ..............................................................19
                                                                                                                                                         .
                                                                                                                                                                  G
                                                                                   DTC Logic ...............................................................19
                                                                                                                                                         .
INSPECTION AND ADJUSTMENT .................... 5
                                         .                                         Diagnosis Procedure ..............................................19  .
  Preliminary Check .................................................... 5
                                                                  .
  Transmitter Wake Up Operation .............................. 5  .              C1735 IGNITION SIGNAL ................................. 20                       H
  ID Registration Procedure ........................................ 6
                                                                  .                Description ..............................................................20
                                                                                                                                                         .
                                                                                   DTC Logic ...............................................................20
                                                                                                                                                         .
FUNCTION DIAGNOSIS .............................. 8
                                             .                                     Diagnosis Procedure ..............................................20  .        I
TPMS .................................................................. 8
                                                                  .              ECU DIAGNOSIS ........................................ 21
                                                                                                                                    .
  System Diagram ....................................................... 8
                                                                  .
  System Description .................................................. 8
                                                                  .              BCM (BODY CONTROL MODULE) ................. 21                                   J
  System Component ................................................ 10
                                                                  .                Reference Value .....................................................21
                                                                                                                                                     .
                                                                                   Terminal Layout ......................................................23
                                                                                                                                                     .
DIAGNOSIS SYSTEM (BCM) ...........................11
                                              .                                    Physical Values ......................................................23
                                                                                                                                                     .            K
  CONSULT-III Function (BCM) ................................ 11
                                                         .                         Wiring Diagram .......................................................29
                                                                                                                                                     .
  Self-Diagnosis (Without CONSULT-III) .................. 12
                                                         .                         Self-Diagnosis (With CONSULT-III) .......................32       .
                                                                                   Self-Diagnosis (Without CONSULT-III) ..................33         .
COMPONENT DIAGNOSIS ........................ 14
                                         .                                                                                                                        L
                                                                                 SYMPTOM DIAGNOSIS ............................. 35
                                                                                                                             .
C1708 - C1711 DATA FROM TRANSMITTER
NOT BEING RECEIVED ....................................14
                                                   .                             TPMS ................................................................. 35        M
  Description ............................................................. 14
                                                                       .           Symptom Table ......................................................35
                                                                                                                                                   .
  DTC Logic .............................................................. 14
                                                                       .
  Diagnosis Procedure .............................................. 14.         LOW TIRE PRESSURE WARNING LAMP
  Special Repair Requirement .................................. 15     .         DOES NOT TURN ON ....................................... 36                      N
                                                                                   Low Tire Pressure Warning Lamp Does Not Come
C1712 - C1715, C1720 - C1723, C1724 -                                              On When Ignition Switch Is Turned On ..................36
                                                                                                                                      .
C1727 TRANSMITTER MALFUNCTION ..........16
                                      .                                                                                                                           O
  Description ............................................................. 16
                                                                       .         LOW TIRE PRESSURE WARNING LAMP
  DTC Logic .............................................................. 16
                                                                       .         STAYS ON ........................................................ 37
  Diagnosis Procedure .............................................. 16.           Low Tire Pressure Warning Lamp Stays On When
                                                                                   Ignition Switch Is Turned On ..................................37
                                                                                                                                              .                   P
  Special Repair Requirement .................................. 17     .

C1716 - C1719 TRANSMITTER PRESSURE                                               LOW TIRE PRESSURE WARNING LAMP
MALFUNCTION .................................................18
                                                         .                       BLINKS ............................................................. 38
  Description ............................................................. 18
                                                                       .           Low Tire Pressure Warning Lamp Flashes When
  DTC Logic .............................................................. 18
                                                                       .           Ignition Switch Is Turned On ..................................38
                                                                                                                                              .
  Diagnosis Procedure .............................................. 18.


Revision: November 2008                                                    WT-1                                                                 2009 Titan
HAZARD WARNING LAMPS FLASH .............. 39
                                      .                                         PREPARATION ................................................ 44
                                                                                                                                         .
  Hazard Warning Lamps Flash When Ignition                                        Special Service Tool .............................................. 44
                                                                                                                                                  .
  Switch Is Turned On .............................................. 39
                                                                 .                Commercial Service Tool ....................................... 44
                                                                                                                                                  .

"TIRE PRESSURE" INFORMATION IN DIS-                                             ON-VEHICLE MAINTENANCE .................. 45
PLAY UNIT DOES NOT EXIST ........................ 40
                                              .
  "TIRE PRESSURE" Information in Display Unit                                   WHEEL ............................................................. 45
                                                                                                                                                .
  Does Not Exist ....................................................... 40
                                                                     .            Inspection ............................................................... 45
                                                                                                                                                         .

ID REGISTRATION CANNOT BE COMPLET-                                              WHEEL AND TIRE ASSEMBLY ...................... 46
                                                                                                                           .
ED ..................................................................... 41
                                                                     .            Balancing Wheels .................................................. 46  .
  ID Registration Cannot Be Completed .................. 41
                                                     .                            Rotation .................................................................. 47
                                                                                                                                                          .

NOISE, VIBRATION, AND HARSHNESS                                                 REMOVAL AND INSTALLATION .............. 49
(NVH) TROUBLESHOOTING ........................... 42
                                              .                                 REMOVAL AND INSTALLATION .................... 49
                                                                                                                          .
  NVH Troubleshooting Chart .................................. 42
                                                           .
                                                                                  Transmitter (Pressure Sensor) ............................... 49
                                                                                                                                            .
PRECAUTION ............................................ 43
                                                    .                           SERVICE DATA AND SPECIFICATIONS
PRECAUTIONS ................................................ 43
                                                         .                      (SDS) .......................................................... 51
  Precaution for Supplemental Restraint System
  (SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
                                                                                SERVICE DATA AND SPECIFICATIONS
  SIONER" ................................................................ 43
                                                                       .        (SDS) ................................................................ 51
                                                                                                                                                   .
  Precaution for work ................................................ 43
                                                                       .          Road Wheel ........................................................... 51  .
                                                                                  Tire ......................................................................... 51
                                                                                                                                                             .
PREPARATION .......................................... 44
                                                   .




Revision: November 2008                                                   WT-2                                                                      2009 Titan
                            DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
BASIC INSPECTION                                                                                                     A
DIAGNOSIS AND REPAIR WORKFLOW
Repair Work Flow                                                                           INFOID:0000000003788393
                                                                                                                     B

WORK FLOW
                                                                                                                     C


                                                                                                                     D


                                                                                                                     WT



                                                                                                                     F


                                                                                                                     G


                                                                                                                     H



                                                                                                                     I


                                                                                                                     J



                                                                                                                     K


                                                                                                                     L



                                                                                                                     M
                                                                                         ALEIA0003GB



WT-5, "Preliminary Check"     WT-32, "Self-Diagnosis (With CON- WT-35, "Symptom Table"                               N
                              SULT-III)"

DETAILED FLOW
                                                                                                                     O
1.CUSTOMER INFORMATION
Interview the customer to obtain detailed information about the symptom.
                                                                                                                     P

         >> GO TO 2
2.PRELIMINARY CHECK
Perform preliminary check. Refer to WT-5, "Preliminary Check".

         >> GO TO 3
Revision: November 2008                              WT-3                                       2009 Titan
                            DIAGNOSIS AND REPAIR WORKFLOW
< BASIC INSPECTION >
3.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-32, "Self-Diagnosis (With CONSULT-III)" (with CONSULT-III) or WT-
33, "Self-Diagnosis (Without CONSULT-III)" (without CONSULT-III).

         >> GO TO 4
4.SYMPTOM
Check for symptoms. Refer to WT-35, "Symptom Table".

         >> GO TO 5
5.MALFUNCTIONING PARTS
Repair or replace the applicable parts.

         >> GO TO 6
6.DRIVE TEST
1.   Perform a drive test.
2.   Check the low tire pressure warning lamp.

         >> GO TO 7
7.SELF-DIAGNOSIS
Perform SELF-DIAGNOSIS. Refer to WT-32, "Self-Diagnosis (With CONSULT-III)" (with CONSULT-III) or WT-
33, "Self-Diagnosis (Without CONSULT-III)" (without CONSULT-III).
Are any DTC's displayed?
 YES >> GO TO 5
 NO       >> Inspection End.




Revision: November 2008                          WT-4                                       2009 Titan
                                 INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
INSPECTION AND ADJUSTMENT
                                                                                                              A
Preliminary Check                                                                   INFOID:0000000003788394



1.TIRE PRESSURE                                                                                               B
Check all tire pressures. Refer to WT-51, "Tire".
Do tire pressures match specification?
                                                                                                              C
 YES >> GO TO 2.
 NO       >> Adjust tire pressures to specified value.
2.LOW TIRE PRESSURE WARNING LAMP                                                                    D
Check low tire pressure warning lamp activation.
Does the low tire pressure warning lamp activate for one second when ignition switch is turned ON?
 YES >> GO TO 3.                                                                                   WT
 NO     >> GO TO WT-36, "Low Tire Pressure Warning Lamp Does Not Come On When Ignition Switch Is
            Turned On".
3.BCM CONNECTOR                                                                                               F
1. Disconnect BCM harness connectors.
2. Check terminals for damage or loose connections.
3. Reconnect harness connectors.                                                                              G
Are BCM connectors damaged or loose?
 YES >> Repair or replace damaged parts.
 NO    >> GO TO 4.                                                                                            H
4.TRANSMITTER ACTIVATION TOOL
Check battery in transmitter activation tool.                                                                 I
Is transmitter activation tool battery fully charged?
  YES >> Perform self-diagnosis. Refer to WT-11, "CONSULT-III Function (BCM)".
  NO     >> Replace battery in transmitter activation tool.                                                   J
Transmitter Wake Up Operation                                                       INFOID:0000000003788395



NOTE:                                                                                                         K
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter
Activation Tool J-45295 before ID registration can be performed.                                              L
1. Turn ignition switch ON. Push the transmitter activation tool
    against the tire near the front left transmitter. Press the button for
    5 seconds. The hazard warning lamps flash per the following
    diagram.                                                                                                  M

        Tool number       : (J-45295)
                                                                                                              N



                                                                                                              O
                                                                                              LEIA0036E


2.   Repeat this procedure for each tire in the following order: FL, FR, RR, RL.
                                                                                                              P




Revision: November 2008                              WT-5                                2009 Titan
                                     INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
3. When the BCM finishes assigning each tire ID, the BCM flashes the hazard warning lamps and sends
   flashing indicator status by CAN according to the following time chart.




                                                                                              WEIA0177E

4.   After completing wake up of all transmitters, make sure low tire pressure warning lamp goes out.
ID Registration Procedure                                                                       INFOID:0000000003788396




ID REGISTRATION WITH TRANSMITTER ACTIVATION TOOL
NOTE:
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter
Activation Tool J-45295 before ID registration can be performed.
1. Connect CONSULT-III.
2. Select "ID REGIST" under BCM.
3. Push the transmitter activation tool against the tire near the front
    left transmitter. Press the button for 5 seconds.

          Tool number       : (J-45295)




                                                                                                          LEIA0036E


4.   Register the IDs in order from FR LH, FR RH, RR RH and RR LH. When ID registration of each wheel has
     been completed, the hazard warning lamps flash.

     Step          Activation tire position         Hazard warning lamp                 CONSULT-III
      1                   Front LH
      2                   Front RH                                                         "YET"
                                                      2 times flashing                       
      3                   Rear RH                                                         "DONE"
      4                   Rear LH
5. After completing all ID registrations, press "END" to complete the procedure.
NOTE:
Be sure to register all of the IDs in order from FR LH, FR RH, RR RH, to RR LH, or the self-diagnostic results
display will not function properly.
ID REGISTRATION WITHOUT TRANSMITTER ACTIVATION TOOL
NOTE:
Revision: November 2008                            WT-6                                               2009 Titan
                                      INSPECTION AND ADJUSTMENT
< BASIC INSPECTION >
This procedure must be done after replacement of a low tire pressure warning transmitter or BCM.
New replacement transmitters are provided "asleep" and must first be "woken up" using Transmitter                         A
Activation Tool J-45295 before ID registration can be performed.
1. Connect CONSULT-III.
2. Select "ID REGIST" under BCM.                                                                                          B
3. Adjust the tire pressures to the values shown in the table and drive the vehicle at 40 km/h (25 MPH) or
    more for a few minutes.
                                                                                                                          C
                          Tire position                                Tire pressure kPa   (kg/cm2,   psi)
                            Front LH                                           250 (2.5, 36)
                            Front RH                                           230 (2.3, 33)
                                                                                                                          D

                            Rear RH                                            210 (2.1, 30)
                            Rear LH                                            190 (1.9, 27)                              WT
4.   After completing all ID registrations, press "END" to complete the procedure.

                    Activation tire position                                  CONSULT-III                                 F
                           Front LH
                          Front RH                                                "YET"
                                                                                                                          G
                           Rear RH                                               "DONE"
                           Rear LH
5.   Inflate all tires to proper pressure. Refer to WT-51, "Tire".                                                        H



                                                                                                                          I


                                                                                                                          J



                                                                                                                          K


                                                                                                                          L



                                                                                                                          M



                                                                                                                          N



                                                                                                                          O



                                                                                                                          P




Revision: November 2008                                WT-7                                                  2009 Titan
                                                               TPMS
< FUNCTION DIAGNOSIS >
FUNCTION DIAGNOSIS
TPMS
System Diagram                                                                          INFOID:0000000003788397




                                                                                      ALEIA0004GB



System Description                                                                      INFOID:0000000003788398




BODY CONTROL MODULE (BCM)
The BCM is shown with the lower instrument panel LH removed. The
BCM reads the air pressure signal received by the remote keyless
entry receiver, and controls the low tire pressure warning lamp as
shown below. It also has a self-diagnosis function to detect a system
malfunction.

                  Condition                       Low tire pressure warning lamp
 System normal                                   On for 1 second after ignition ON

 Tire less than 193 kPa (2.0 kg/cm2 , 28 psi)                  ON
 [Flat tire]                                                                                        LEIA0068E

                                                After key ON, flashes once per sec-
 TPMS malfunction
                                                  ond for 1 minute, then stays ON


TRANSMITTER
A sensor-transmitter integrated with a valve is installed in each
wheel, and transmits a detected air pressure signal in the form of a
radio wave. The radio signal is received by the remote keyless entry
receiver.




                                                                                                    WEIA0137E


REMOTE KEYLESS ENTRY RECEIVER



Revision: November 2008                                        WT-8                           2009 Titan
                                                    TPMS
< FUNCTION DIAGNOSIS >
The remote keyless entry receiver is shown with the instrument
panel RH removed. The remote keyless entry receiver receives the                        A
air pressure signal transmitted by the transmitter in each wheel.

                                                                                        B



                                                                                        C

                                                                            LEIA0069E

                                                                                        D
COMBINATION METER
The combination meter receives tire pressure status from the BCM
using CAN communication. When a low tire pressure condition is
sensed by the BCM, the combination meter low tire pressure warn-                        WT
ing lamp is activated.

                                                                                        F


                                                                                        G

                                                                            LEIA0055E


TIRE PRESSURE WARNING CHECK CONNECTOR                                                   H
The tire pressure warning check connector can be grounded in order
to initiate self-diagnosis without CONSULT-III. Refer to WT-12, "Self-
Diagnosis (Without CONSULT-III)". The tire pressure warning check
                                                                                        I
connector is located behind the lower portion of the instrument panel
LH.

                                                                                        J



                                                                                        K
                                                                            LEIA0068E


DISPLAY UNIT (with NAVI)
Displays the air pressure of each tire.                                                 L
NOTE:
After the ignition switch is turned on, the pressure values will not be
displayed until the data of each wheel is received.                                     M



                                                                                        N



                                                                            WEIA0162E
                                                                                        O



                                                                                        P




Revision: November 2008                              WT-9                 2009 Titan
                                                     TPMS
< FUNCTION DIAGNOSIS >
System Component                                                                                          INFOID:0000000003788399




                                                                                                        AWEIA0007ZZ



1.   Display control unit M95        2.   Tire pressure warning check connec-   3.   Transmitter
     (with NAVI)                          tor
                                          M123
4.   BCM                             5.   Combination meter                     6.   Display unit M93
     M18, M20                             M24                                        (with NAVI)
7.   Remote keyless entry receiver
     M120




Revision: November 2008                             WT-10                                                       2009 Titan
                                            DIAGNOSIS SYSTEM (BCM)
< FUNCTION DIAGNOSIS >
DIAGNOSIS SYSTEM (BCM)
                                                                                                                                                       A
CONSULT-III Function (BCM)                                                                                                   INFOID:0000000003788400




CONSULT-III DIAGNOSTIC MODES                                                                                                                           B
CONSULT-III can display each diagnostic item using the diagnostic test modes shown following.

                     Diagnostic mode                                                         Description                                               C
                                                          Supports inspections and adjustments. Commands are transmitted to the BCM
 Work Support                                             for setting the status suitable for required operation, input/output signals are re-
                                                          ceived from the BCM and received data is displayed.                                          D
 Data Monitor                                             Displays BCM input/output data in real time.
 Active Test                                              Operation of electrical loads can be checked by sending drive signal to them.
 Self-Diagnostic Results                                  Displays BCM self-diagnosis results.
                                                                                                                                                       WT

 CAN Diag Support Monitor                                 The result of transmit/receive diagnosis of CAN communication can be read.
 ECU Identification                                       BCM part number can be read.
                                                                                                                                                       F
 Configuration                                            Performs BCM configuration read/write functions.

DESCRIPTION
                                                                                                                                                       G
During driving, the tire pressure monitoring system receives the signal transmitted from the transmitter
installed in each wheel, and turns on the low tire pressure warning lamp when the tire pressure becomes low.
The control unit (BCM) for this system has pressure judgement and self-diagnosis functions.
                                                                                                                                                       H
FUNCTION
When the tire pressure monitoring system detects low inflation pressure or an internal malfunction, the low tire
pressure warning lamp in the combination meter comes on. The malfunction is indicated by the low tire pres-
sure warning lamp flashing.                                                                                                                            I

CONSULT-III Application to Tire Pressure Monitoring System
                                                                                                                                                       J
                       ITEM                          SELF-DIAGNOSTIC RESULTS                                DATA MONITOR
    Front - Left transmitter                                           



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo