Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Xterra 2005-2007.2009 Approved Nissan Xterra 2005 ACC
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download ACC documenatation <<
Text preview - extract from the document
B ENGINE
A
ACC
SECTION
ACCELERATOR CONTROL SYSTEM C
D
E
CONTENTS
ACCELERATOR CONTROL SYSTEM ..................... 2 . SERVICE DATA AND SPECIFICATIONS (SDS) ....... 4 . F
Components ............................................................ 2
. Accelerator Control .................................................. 4
.
Removal and Installation ......................................... 2
. ACCELERATOR PEDAL ...................................... 4 .
REMOVAL ............................................................ 2
. G
INSTALLATION .................................................... 2
.
INSPECTION AFTER INSTALLATION ................ 3 .
H
I
J
K
L
M
Revision: February 2006 ACC-1 2005 Xterra
ACCELERATOR CONTROL SYSTEM
ACCELERATOR CONTROL SYSTEM PFP:18005
Components EBS00O3T
WBIA0594E
1. Non-adjustable accelerator pedal assembly
CAUTION:
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor from the accelerator pedal bracket.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
Removal and Installation EBS00O3U
REMOVAL
1. Disconnect the negative battery terminal.
2. Disconnect the accelerator position sensor electrical connector.
a. Pull the connector lock back to unlock the connector from the
accelerator pedal position sensor as shown.
b. Pull up on the connector to disconnect it from the accelerator
pedal position sensor as shown.
3. Remove the two upper and one lower accelerator pedal nuts.
4. Remove the accelerator pedal assembly.
CAUTION:
G Do not disassemble the accelerator pedal assembly.
G Do not remove the accelerator pedal position sensor LBIA0333E
from the accelerator pedal bracket.
G Avoid damage from dropping the accelerator pedal assembly during handling.
G Keep the accelerator pedal assembly away from water.
INSTALLATION
Installation is in the reverse order of removal.
Revision: February 2006 ACC-2 2005 Xterra
ACCELERATOR CONTROL SYSTEM
INSPECTION AFTER INSTALLATION
G Check that the accelerator pedal moves smoothly within the A
specified range.
Accelerator pedal - total pedal : 48 mm (1.89 in)
ACC
applied stroke "A"
G Check that the accelerator pedal smoothly returns to the original
position. C
G Perform an electrical inspection of the accelerator pedal position
sensor. Refer to EC-659, "DTC P2138 APP SENSOR" .
CAUTION: D
When the harness connector of the accelerator pedal posi- LBIA0434E
tion sensor is disconnected, perform Accelerator Pedal
Released Position Learning. Refer to EC-89, "Accelerator Pedal Released Position Learning" .
E
F
G
H
I
J
K
L
M
Revision: February 2006 ACC-3 2005 Xterra
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) PFP:00030
Accelerator Control EBS00O3V
ACCELERATOR PEDAL
Unit: mm (in)
LBIA0434E
Accelerator pedal - total pedal applied stroke "A" 48 (1.89)
Revision: February 2006 ACC-4 2005 Xterra
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo