Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Xterra 2005-2007.2009 Approved Nissan Xterra 2007 GW
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download GW documenatation <<
Text preview - extract from the document
I BODY
A
GLASSES, WINDOW SYSTEM & MIRRORS
SECTION GW B
C
D
E
CONTENTS
PRECAUTIONS ......................................................... 3
. CAN Communication System Description ............. 19 . F
Precautions for Supplemental Restraint System Schematic .............................................................. 20
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- Wiring Diagram -- WINDOW -- ............................ 21 .
SIONER" ................................................................. 3
. Main Power Window and Door Lock/Unlock Switch G
Handling for Adhesive and Primer .......................... 3 . Harness Connector Terminal Layout ..................... 25 .
PREPARATION .......................................................... 4
. Terminals and Reference Values for Main Power
Special Service Tool ................................................ 4
. Window and Door Lock/Unlock Switch .................. 25 .
H
Commercial Service Tool ........................................ 4 . Terminals and Reference Values for BCM ............. 25 .
SQUEAK AND RATTLE TROUBLE DIAGNOSES..... 5 Work Flow .............................................................. 26
.
Work Flow ............................................................... 5
. CONSULT-II Function (BCM) ................................ 26 .
CUSTOMER INTERVIEW .................................... 5 . CONSULT-II START PROCEDURE ................... 26 . GW
DUPLICATE THE NOISE AND TEST DRIVE ...... 6 . ACTIVE TEST .................................................... 26.
CHECK RELATED SERVICE BULLETINS .......... 6 . WORK SUPPORT .............................................. 26 .
LOCATE THE NOISE AND IDENTIFY THE DATA MONITOR ................................................ 26 . J
ROOT CAUSE ..................................................... 6 . Trouble Diagnoses Symptom Chart ...................... 26 .
REPAIR THE CAUSE .......................................... 6 . BCM Power Supply and Ground Circuit Check ..... 27 .
CONFIRM THE REPAIR ...................................... 7 . Main Power Window and Door Lock/Unlock Switch
K
Generic Squeak and Rattle Troubleshooting .......... 7 . Power Supply and Ground Circuit Check .............. 27 .
INSTRUMENT PANEL ......................................... 7 . Power Window and Door Lock/Unlock Switch RH
CENTER CONSOLE ............................................ 7 . Power Supply Circuit Check .................................. 29 .
DOORS ................................................................ 7
. Front Power Window LH Circuit Check ................. 29 . L
TRUNK ................................................................. 8
. Front Power Window RH Circuit Check (Power Win-
SUNROOF/HEADLINING .................................... 8 . dow and Door Lock/Unlock Switch RH Operation) 30 ...
OVERHEAD CONSOLE (FRONT AND REAR)..... 8 Front Power Window RH Circuit Check (Main Power M
SEATS .................................................................. 8
. Window and Door Lock/Unlock Switch Operation) 34 ...
UNDERHOOD ...................................................... 8 . Door Switch Check ................................................ 36.
Diagnostic Worksheet ............................................. 9 . Rear Power Window LH Circuit Check (Rear Power
WINDSHIELD GLASS ..............................................11 . Window Switch LH Operation) ............................... 37 .
Removal and Installation ........................................11 . Rear Power Window LH Circuit Check (Main Power
REMOVAL ...........................................................11
. Window and Door Lock/Unlock Switch Operation) 41 ...
INSTALLATION ...................................................11 . Rear Power Window RH Circuit Check (Rear Power
POWER WINDOW SYSTEM ................................... 15 . Window Switch RH Operation) .............................. 43 .
Component Parts and Harness Connector Location 15 ... Rear Power Window RH Circuit Check (Main Power
System Description ............................................... 15. Window and Door Lock/Unlock Switch Operation) 47 ...
MANUAL OPERATION ...................................... 16 . FRONT DOOR GLASS AND REGULATOR ............ 49 .
AUTO OPERATION ........................................... 18 . Front Door Glass ................................................... 49
.
POWER WINDOW LOCK .................................. 18 . REMOVAL .......................................................... 49
.
RETAINED POWER OPERATION ..................... 18 . INSTALLATION .................................................. 49 .
Revision: September 2006 GW-1 2007 Xterra
FITTING INSPECTION ....................................... 49 . CAN Communication System Description .............62 .
Front Door Glass Regulator ................................... 50. Schematic ..............................................................63
.
REMOVAL .......................................................... 50
. Wiring Diagram -- DEF -- .....................................64 .
DISASSEMBLY AND ASSEMBLY ...................... 50 . Terminals and Reference Values for BCM .............67 .
INSPECTION AFTER REMOVAL ....................... 50 . Terminals and Reference Values for IPDM E/R .....67 .
INSTALLATION ................................................... 51
. Work Flow ..............................................................67
.
SETTING AFTER INSTALLATION ..................... 52 . CONSULT-II Function (BCM) .................................67 .
REAR DOOR GLASS AND REGULATOR .............. 53 . CONSULT-II START PROCEDURE ....................67 .
Rear Door Glass .................................................... 53
. DATA MONITOR .................................................67 .
REMOVAL .......................................................... 53
. ACTIVE TEST .....................................................67.
INSTALLATION ................................................... 53
. Trouble Diagnoses Symptom Chart .......................67 .
FITTING INSPECTION ....................................... 53 . BCM Power Supply and Ground Circuit Check .....69 .
Rear Door Glass Regulator ................................... 54 . Rear Window Defogger Switch Circuit Check ........69 .
REMOVAL .......................................................... 54
. Rear Window Defogger Circuit Check ...................70 .
INSPECTION AFTER REMOVAL ....................... 54 . Door Mirror Defogger Power Supply Circuit Check
INSTALLATION ................................................... 55
. (With Heated Mirrors) .............................................71.
SIDE WINDOW GLASS ........................................... 56 . Door Mirror LH Defogger Circuit Check (With
Removal and Installation ....................................... 56
. Heated Mirrors) ......................................................73
.
REMOVAL .......................................................... 57
. Door Mirror RH Defogger Circuit Check (With
INSTALLATION ................................................... 57
. Heated Mirrors) ......................................................74
.
INSIDE MIRROR ...................................................... 58
. Filament Check ......................................................74
.
Removal and Installation ....................................... 58
. Filament Repair ......................................................75
.
REMOVAL .......................................................... 58
. REPAIR EQUIPMENT ........................................75 .
INSTALLATION ................................................... 58
. REPAIRING PROCEDURE ................................75 .
BACK DOOR WINDOW GLASS ............................. 59 . DOOR MIRROR ........................................................77.
Removal and Installation ....................................... 59
. Wiring Diagram -- MIRROR -- .............................77 .
REMOVAL .......................................................... 59
. Door Mirror Assembly ............................................79 .
INSTALLATION ................................................... 60
. POWER MIRROR ...............................................79 .
REAR WINDOW DEFOGGER ................................. 61 . M ANUAL MIRROR ............................................79 .
Component Parts and Harness Connector Location 61 ... Door Mirror Glass ...................................................80
.
System Description ................................................ 61
. REMOVAL AND INSTALLATION ........................80 .
Revision: September 2006 GW-2 2007 Xterra
PRECAUTIONS
PRECAUTIONS PFP:00001
A
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EIS0066D
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along B
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front C
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING: D
G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer. E
G Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section. F
G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
G
Handling for Adhesive and Primer EIS0066E
G Do not use an adhesive which is past its usable date. Shelf life of this product is limited to six months after
the date of manufacture. Carefully adhere to the expiration or manufacture date printed on the box. H
G Keep primers and adhesive in a cool, dry place. Ideally, they should be stored in a refrigerator.
G Open the seal of the primer and adhesive just before application. Discard the remainder.
GW
G Before application, be sure to shake the primer container to stir the contents. If any floating material is
found, do not use it.
G If any primer or adhesive contacts the skin, wipe it off with gasoline or equivalent and wash the skin with
J
soap.
G When using primer and adhesive, always observe the precautions in the instruction manual.
K
L
M
Revision: September 2006 GW-3 2007 Xterra
PREPARATION
PREPARATION PFP:00002
Special Service Tool EIS0066G
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description
(Kent-Moore No.)
Tool name
-- Locating the noise
(J-39570)
Chassis ear
SIIA0993E
-- Repairing the cause of noise
(J-43980)
NISSAN Squeak and Rat-
tle Kit
SIIA0994E
Commercial Service Tool EIS0066H
(Kent-Moore No.) Description
Tool name
(J-39565) Locating the noise
Engine ear
SIIA0995E
( -- ) Holding door glass
Suction Lifter
LIIA1991E
Revision: September 2006 GW-4 2007 Xterra
SQUEAK AND RATTLE TROUBLE DIAGNOSES
SQUEAK AND RATTLE TROUBLE DIAGNOSES PFP:00000
A
Work Flow EIS0066I
B
C
D
E
F
SBT842
G
CUSTOMER INTERVIEW
Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diag- H
nostic Worksheet during the interview to document the facts and conditions when the noise occurs and any
customer's comments; refer to GW-9, "Diagnostic Worksheet" . This information is necessary to duplicate the
conditions that exist when the noise occurs.
GW
G The customer may not be able to provide a detailed description or the location of the noise. Attempt to
obtain all the facts and conditions that exist when the noise occurs (or does not occur).
G If there is more than one noise in the vehicle, be sure to diagnose and repair the noise that the customer
J
is concerned about. This can be accomplished by test driving the vehicle with the customer.
G After identifying the type of noise, isolate the noise in terms of its characteristics. The noise characteristics
are provided so the customer, service adviser and technician are all speaking the same language when
defining the noise. K
G Squeak --(Like tennis shoes on a clean floor)
Squeak characteristics include the light contact/fast movement/brought on by road conditions/hard sur-
faces = higher pitch noise/softer surfaces = lower pitch noises/edge to surface = chirping. L
G Creak--(Like walking on an old wooden floor)
Creak characteristics include firm contact/slow movement/twisting with a rotational movement/pitch
dependent on materials/often brought on by activity. M
G Rattle--(Like shaking a baby rattle)
Rattle characteristics include the fast repeated contact/vibration or similar movement/loose parts/missing
clip or fastener/incorrect clearance.
G Knock --(Like a knock on a door)
Knock characteristics include hollow sounding/sometimes repeating/often brought on by driver action.
G Tick--(Like a clock second hand)
Tick characteristics include gentle contacting of light materials/loose components/can be caused by driver
action or road conditions.
G Thump--(Heavy, muffled knock noise)
Thump characteristics include softer knock/dead sound often brought on by activity.
G Buzz--(Like a bumble bee)
Buzz characteristics include high frequency rattle/firm contact.
G Often the degree of acceptable noise level will vary depending upon the person. A noise that you may
judge as acceptable may be very irritating to the customer.
G Weather conditions, especially humidity and temperature, may have a great effect on noise level.
Revision: September 2006 GW-5 2007 Xterra
SQUEAK AND RATTLE TROUBLE DIAGNOSES
DUPLICATE THE NOISE AND TEST DRIVE
If possible, drive the vehicle with the customer until the noise is duplicated. Note any additional information on
the Diagnostic Worksheet regarding the conditions or location of the noise. This information can be used to
duplicate the same conditions when you confirm the repair.
If the noise can be duplicated easily during the test drive, to help identify the source of the noise, try to dupli-
cate the noise with the vehicle stopped by doing one or all of the following:
1) Close a door.
2) Tap or push/pull around the area where the noise appears to be coming from.
3) Rev the engine.
4) Use a floor jack to recreate vehicle "twist".
5) At idle, apply engine load (electrical load, half-clutch on M/T model, drive position on A/T model).
6) Raise the vehicle on a hoist and hit a tire with a rubber hammer.
G Drive the vehicle and attempt to duplicate the conditions the customer states exist when the noise occurs.
G If it is difficult to duplicate the noise, drive the vehicle slowly on an undulating or rough road to stress the
vehicle body.
CHECK RELATED SERVICE BULLETINS
After verifying the customer concern or symptom, check ASIST for Technical Service Bulletins (TSBs) related
to that concern or symptom.
If a TSB relates to the symptom, follow the procedure to repair the noise.
LOCATE THE NOISE AND IDENTIFY THE ROOT CAUSE
1. Narrow down the noise to a general area.To help pinpoint the source of the noise, use a listening tool
(Chassis Ear: J-39570, Engine Ear: J-39565 and mechanic's stethoscope).
2. Narrow down the noise to a more specific area and identify the cause of the noise by:
G removing the components in the area that you suspect the noise is coming from.
Do not use too much force when removing clips and fasteners, otherwise clips and fasteners can be bro-
ken or lost during the repair, resulting in the creation of new noise.
G tapping or pushing/pulling the component that you suspect is causing the noise.
Do not tap or push/pull the component with excessive force, otherwise the noise will be eliminated only
temporarily.
G feeling for a vibration with your hand by touching the component(s) that you suspect is (are) causing the
noise.
G placing a piece of paper between components that you suspect are causing the noise.
G looking for loose components and contact marks.
Refer to GW-7, "Generic Squeak and Rattle Troubleshooting" .
REPAIR THE CAUSE
G If the cause is a loose component, tighten the component securely.
G If the cause is insufficient clearance between components:
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo