Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Xterra 2005-2007.2009 Approved Nissan Xterra 2007 EX
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download EX documenatation <<
Text preview - extract from the document
B ENGINE
A
SECTION
EXHAUST SYSTEM
EX EX
C
D
E
CONTENTS
PRECAUTIONS ......................................................... 2
. EXHAUST SYSTEM ................................................... 4
. F
Precautions for Supplemental Restraint System Checking Exhaust System ....................................... 4
.
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- Removal and Installation ......................................... 4
.
SIONER" ................................................................. 2
. REMOVAL ............................................................ 5
. G
PREPARATION .......................................................... 3
. INSTALLATION .................................................... 5
.
Special Service Tool ................................................ 3
. INSPECTION AFTER INSTALLATION ................. 5 .
Commercial Service Tools ....................................... 3 .
H
I
J
K
L
M
Revision: September 2006 EX-1 2007 Xterra
PRECAUTIONS
PRECAUTIONS PFP:00001
Precautions for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER" EBS00T2L
The Supplemental Restraint System such as "AIR BAG" and "SEAT BELT PRE-TENSIONER", used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
G To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be per-
formed by an authorized NISSAN/INFINITI dealer.
G Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air
Bag Module, see the SRS section.
G Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or
harness connectors.
Revision: September 2006 EX-2 2007 Xterra
PREPARATION
PREPARATION PFP:00002
A
Special Service Tool EBS00O3M
The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
Tool number Description
EX
(Kent-Moore No.)
Tool name
KV10114400 Loosening or tightening heated oxygen sen-
(J-38365) sors: C
Heated oxygen sensor wrench a: 22 mm (0.87 in)
D
S-NT636
E
Commercial Service Tools EBS00O3N
(Kent-Moore No.) Description
Tool name
F
(J-43897-18) Reconditioning the exhaust system threads
(J-43897-12) before installing a new heated oxygen sensor
Oxygen sensor thread cleaner (Use with anti-seize lubricant shown below):
a: J-43897-18 (18 mm, 0.71 in) dia. for zirco- G
nia oxygen sensor
b: J-43897-12 (12 mm, 0.47 in) dia. for tita-
nia oxygen sensor
AEM488
H
Anti-seize lubricant (Permatex 133AR Lubricating oxygen sensor thread cleaning
or equivalent meeting MIL specifica- tool when reconditioning exhaust system
tion MIL-A-907) threads I
J
AEM489
Power tool Loosening nuts and bolts
K
L
PBIC0190E
M
Revision: September 2006 EX-3 2007 Xterra
EXHAUST SYSTEM
EXHAUST SYSTEM PFP:20100
Checking Exhaust System EBS00O3O
Check exhaust pipes, muffler and mounting for improper attachment, leaks, cracks, damage or deterioration.
G If anything is found, repair or replace damaged parts.
SMA211A
Removal and Installation EBS00O3P
Exhaust System
WBIA0735E
1. Tailpipe hanger bracket 2. Tailpipe 3. Gasket
4. Main muffler 5. Right front exhaust tube 6. Ring gasket
7. Heated oxygen sensor 2 (bank 1) 8. Heated oxygen sensor 2 (bank 2) 9. Left front exhaust tube
10. Center exhaust tube 11. Muffler hanger bracket front 12. Muffler hanger bracket rear
Vehicle front
CAUTION:
G Be sure to use genuine exhaust system parts or equivalents which are specially designed for heat
resistance, corrosion resistance, and shape.
G Perform the operation with the exhaust system fully cooled. The system will be hot just after the
engine stops.
G Be careful not to cut your hand on the heat insulator edge.
Revision: September 2006 EX-4 2007 Xterra
EXHAUST SYSTEM
REMOVAL
Remove exhaust system components using power tool. A
INSTALLATION
Installation is in the reverse order of removal. EX
CAUTION:
G Always replace exhaust gaskets with new ones when reassembling.
G Before installing a new heated oxygen sensor, clean and lube the exhaust tube threads using tool. C
Tool number
A : -- (J-43897-18)
D
B : -- (J-43897-12)
G Discard any heated oxygen sensor which has been dropped from a height of more than 0.5 m (19.7
in) onto a hard surface such as a concrete floor; install a new one. E
G Do not over-torque the heated oxygen sensor. Doing so may damage the heated oxygen sensor,
resulting in the MIL coming on.
G If any mounting insulator is badly deformed, repair or replace it. If deposits such as mud pile up on F
the mounting insulators, clean and inspect them.
G Temporarily tighten the mounting nuts on the exhaust manifold side and the mounting bolts on the
vehicle side. Check each part for interference with other components, and then tighten the nuts
G
and bolts to specification.
INSPECTION AFTER INSTALLATION
G With the engine running, check exhaust tube joints for gas leakage and unusual noises. H
G Check to ensure that mounting brackets and mounting rubbers are installed properly and free from undue
stress. Improper installation could result in excessive noise and vibration.
I
J
K
L
M
Revision: September 2006 EX-5 2007 Xterra
EXHAUST SYSTEM
Revision: September 2006 EX-6 2007 Xterra
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo