Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Nissan Xterra 2000-2004 Approved Nissan Xterra 2003 EX

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
EX


>> Download EX documenatation <<

Text preview - extract from the document
B ENGINE

                                                                                                                                                   A


                                                                                                                                                   EX
                                                                                            SECTION
                                                                                          EXHAUST SYSTEM                                           C


                                                                                                                                                   D


                                                                                                                                                   E
                                                            CONTENTS
PREPARATION .......................................................... 2
                                                                 .         EXHAUST SYSTEM ................................................... 3
                                                                                                                                         .         F
 Special Service Tool ................................................ 2
                                                                 .          Removal and Installation ......................................... 3
                                                                                                                                         .
 Commercial Service Tool ........................................ 2
                                                                 .
                                                                                                                                                   G


                                                                                                                                                   H



                                                                                                                                                    I


                                                                                                                                                    J



                                                                                                                                                   K


                                                                                                                                                   L



                                                                                                                                                   M




                                                                      EX-1
                                                       PREPARATION

PREPARATION                                                                                                                  PFP:00002

Special Service Tool                                                                                                             EBS00CDR

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.
  Tool number
  (Kent-Moore No.)                                                                        Description
  Tool name
  KV10114400 (J38365) Heated oxygen                                                      Loosening or tightening rear heated oxygen
  sensor wrench                                                                          sensor
                                                                                         a: 22 mm (0.87 in)




                                                                         NT636




Commercial Service Tool                                                                                                          EBS00CDS


  Tool name                                                                              Description
  (J-43897-18)                                                                           Reconditioning the exhaust system threads
  (J-43897-12)                                                                           before installing a new oxygen sensor. Use
  Oxygen sensor thread cleaner                                                           with anti-seize lubricant shown in Commercial
                                                                                         Service Tools.
                                                                                         a: J-43897-18 18mm diameter, for Zirconia
                                                                                         Oxygen Sensor
                                                                                         b: J-43897-12 12mm diameter, for Titania
                                                                         AEM488          Oxygen Sensor
  Anti-seize lubricant                                                                   Lubricating oxygen sensor thread cleaning
  PermatexTM 133AR or equivalent                                                         tool when reconditioning exhaust system
  meeting MIL specification MIL-A-907                                                    threads.




                                                                         AEM489




                                                                EX-2
                                     EXHAUST SYSTEM

EXHAUST SYSTEM                                                                            PFP:20100
                                                                                                        A
Removal and Installation                                                                     EBS00CDT


CAUTION:
q  Always replace the exhaust tube gaskets with new ones when reassembling the system.               EX
q  With the engine running, check all of the exhaust tube connections for exhaust gas leaks, and the
   entire system for any unusual noises.
q  Check to ensure that the mounting brackets and mounting insulators are installed properly and C
   are free from undue stress. Improper installation could result in excessive noise or vibration.
q  Discard any heated oxygen sensor which has been dropped from a height of more than 0.5 m (19.7
   in) onto a hard surface such as a concrete floor, replace it with a new one.                       D
q  Before installing a new oxygen sensor, clean the exhaust tube threads using Oxygen Sensor
   Thread Cleaner tool J-43897-18 or J-43897-12 and approved anti-seize lubricant.
q  Do not over-tighten the oxygen sensor. Over-tightening may cause damage to the oxygen sensor, E
   resulting in the MIL coming on.


                                                                                                        F


                                                                                                        G


                                                                                                        H



                                                                                                        I


                                                                                                        J



                                                                                                        K


                                                                                                        L



                                                                                                        M




                                              EX-3
                                              EXHAUST SYSTEM

                                                 KA24DE Models




                                                                                                WBIA0226E

1.   Three way convertor (under floor)   2.   Gasket             3.   Heated oxygen sensor 2 (rear)




                                                       EX-4
                                            EXHAUST SYSTEM

                                              VG33E 2WD Models
                                                                                                            A


                                                                                                            EX



                                                                                                            C


                                                                                                            D


                                                                                                            E



                                                                                                            F


                                                                                                            G


                                                                                                            H



                                                                                                             I


                                                                                                             J



                                                                                                            K


                                                                                                            L



                                                                                                            M


                                                                                                WBIA0230E

1.   Gasket                            2.   Front tube           3.   Heated oxygen sensor 2 (bank 1)
4.   Heated oxygen sensor 2 (bank 2)   5.   Gasket               6.   Mounting rubber
7.   Mounting bracket                  8.   Center muffler       9.   Three way convertor




                                                         EX-5
                                            EXHAUST SYSTEM

                                              VG33E 4WD Models




                                                                                                WBIA0231E

1.   Gasket                            2.   Front tube           3.   Heated oxygen sensor 2 (bank 1)
4.   Heated oxygen sensor 2 (bank 2)   5.   Gasket               6.   Mounting rubber
7.   Mounting bracket                  8.   Center muffler       9.   Three way convertor




                                                         EX-6
                                            EXHAUST SYSTEM

                                                VG33ER Models
                                                                                                           A


                                                                                                           EX



                                                                                                           C


                                                                                                           D


                                                                                                           E



                                                                                                           F


                                                                                                           G


                                                                                                           H



                                                                                                            I


                                                                                                            J



                                                                                                           K


                                                                                                           L



                                                                                                           M


                                                                                               WBIA0229E

1.   Gasket                            2.   Front tube          3.   Heated oxygen sensor 2 (bank 1)
4.   Heated oxygen sensor 2 (bank 2)   5.   Gasket              6.   Mounting rubber
7.   Mounting bracket                  8    Center muffler      9.   Three way convertor




                                                         EX-7
EXHAUST SYSTEM




     EX-8



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo