Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 MECHANICAL COMPONENTS SECTION Air Conditioning System MSA5T0125A27844

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5T0125A27844


>> Download MSA5T0125A27844 documenatation <<

Text preview - extract from the document
4-7   [W12B0]                         SERVICE PROCEDURE
13. Receiver Drier


6) The condenser should be installed in the                 13. Receiver Drier
reverse order in which it was removed.
When installing the condenser, pay attention to the         A: REMOVAL AND INSTALLATION
following:
                                                            1) Disconnect battery negative terminal.
CAUTION:                                                    2) Discharge refrigerant using refrigerant recovery
Before connecting the pipe, be sure to apply oil            system. 
to the periphery of O-ring.                                 3) Disconnect pressure switch harness (A).
NOTE:                                                       4) Disconnect pipes (B).
After installing condenser, ensure that guide (A) on        5) Remove mounting bolt (C) and remove receiver
lower side of condenser is inserted into hole in            drier.
radiator panel (B). Tighten attaching bolts.                CAUTION:
                                                            The receiver drier contains a desiccant. Be
                                                            sure to put a blind plug in the detached
                                                            receiver drier to protect it from moisture.




                                        S4M0490A

7) Charge refrigerant. 
                                                                                                     H4M1263A
B: INSPECTION
1) Make sure the condenser fins are free from               6) Install the receiver drier in the reverse order of
dust and insects. If the fins are clogged, clean by         removal.
blowing air or water through them.                          7) Charge refrigerant. 

NOTE:
To prevent dust and water from getting into the
condenser, this work must be done when the con-
denser is installed in an actual vehicle.
2) Check the condenser to see if it shows any sign
of oil. Should oil ooze or gas leak from the con-
denser replace it with a new one.




                                                       26



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo