Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 MECHANICAL COMPONENTS SECTION Pedal System and Control Cables MSA5T0125A27816

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5T0125A27816


>> Download MSA5T0125A27816 documenatation <<

Text preview - extract from the document
                                   SERVICE PROCEDURE                                         [W2A0] 4-5
                                                                                       2. Accelerator Cable


2. Accelerator Cable
A: REMOVAL




                                                                                                  S4M0303B


(1) Clip                           (3) Toe board                          (5) Clip
(2) Clip                           (4) To accelerator pedal

1) Disconnect accelerator cable from connector          5) Disconnect cable end from accelerator cable
inside engine compartment first.                        bracket inside driver compartment.
2) Remove lock nut from accelerator cable               6) Remove clip inside engine compartment.
bracket.                                                7) Working inside engine compartment, remove
3) Separate accelerator cable (1) from bracket,         the casing cap out of the toe board by turning it
then unlock inner cable.                                clockwise.




                                      B4M1185C                                                  G4M0335

4) Remove cable end from throttle cam using your        8) Pull out the cable from the toe board hole.
fingertips.
CAUTION:
Be careful not to bend inner cable.


                                                   11
4-5   [W2B0]                          SERVICE PROCEDURE
2. Accelerator Cable


B: INSTALLATION                                         2) Adjustment after cable installation; 
1) Install in the reverse order of removal.
CAUTION:



◦ Jabse Service Manual Search 2021 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo