Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 MECHANICAL COMPONENTS SECTION Suspension MSA5T0125A27744

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5T0125A27744


>> Download MSA5T0125A27744 documenatation <<

Text preview - extract from the document
                                  SERVICE PROCEDURE       [W1A0] 4-1
                                                      1. On-car Services


1. On-car Services
A: WHEEL ALIGNMENT
PROCEDURES
Check, adjust and/or measure wheel alignment in
accordance with procedures indicated in figure:




                                                               B4M1088A




                                                  5
4-1   [W1B1]                                  SERVICE PROCEDURE
1. On-car Services


B: INSPECTION AND ADJUSTMENT
1. WHEEL ARCH HEIGHT (FRONT AND
REAR)
1) Adjust tire pressure to specifications.
2) Set vehicle under "curb weight" conditions.
(Empty luggage compartment, install spare tire,
jack, service tools, and top up fuel tank.)
3) Set steering wheel in a wheel-forward position.
4) Suspend thread from wheel arch (point "A" in
figure) to determine a point directly above center of
spindle.
5) Measure distance between measuring point
and center of spindle.




                                                                                                   S4M0086B


(1) Wheel arch height                          (4) Front wheel arch height   (7) Measuring point
(2) Front fender                               (5) Rear wheel arch height    (8) End of spindle
(3) Outer rear quarter                         (6) Cross-section of arch


                 Specified wheel arch height
             Front                         Rear
            +12                           +12
        432 /-24 mm                   435 /-24 mm
      (17.01+0.47/-0.94 in)         (17.13+0.47/-0.94 in)




                                                                6
                                        SERVICE PROCEDURE                                                [W1B2] 4-1
                                                                                                     1. On-car Services


2. CAMBER (FRONT AND REAR)                                     2) Turn camber adjusting bolt so that camber is
                                                               set at the specification.



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo