Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 AUTOMATIC TRANSMISSION MSA5T0128A34676

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5T0128A34676 documenatation <<

Text preview - extract from the document

                                                TRANSMISSION COVER
                                                                                                Automatic Transmission

 8. Transmission Cover 55,~~                                      NOTE :
                                                                  Add 0 .05 mm (0.0020 in) and 0.20 mm (0.0079 in)
 A: REMOVAL           S5fO640A18                                  thick shims to area "T". Calculate formula 2 to
                                                                  determine "H" . The calculated "H" refers to the
 1) Remove transmission cover.
                                                                  shim thickness range . Select shims of suitable
                                                                  thicknesses within the calculated "H" range.
                                                                  (0 to 6 teeth)
                                                                  T=(L+G)-f -H
                                                                  T: Shim clearance
                                                                  L: Distance from end of extension case to end of
                                                                  rear drive shaft
                                                                  G : Gasket thickness [0.45 mm (0.0177 in)]
                                                                      Height from end of transmission case to end of
                                                                  reduction drive gear
                                                                  H : Shim thickness
                                                 H3M1841
                                                                  0 .05 - 0.25 mm (0 .0020 - 0.0098 in)
2) Take out shim from transmission cover.
                                                                                     Adjusting shim
                                                                          Pan No .               Thickness mm (in)
 B : INSTALLATION                  5510640A11
                                                                        31288AA020                 0.15 (0.0059)
1) Measure distance L from end of transmission
cover point at bearing location with ST                        4) Attach the selected adjusting shim to transmis-
ST 398643600 GAUGE                                             sion cover.
L = Measured value - 15 mm                                     5) Install the transmission cover to the transmis-
                                                               sion case.
                                                               CAUTION:
                                                               Be sure to use a new gasket.
                                                               6) Tighten bolts to secure the case .
                                                                  Tightening torque:
                                                                      25 N~m (2.5 kgf-m, 18.1 ft-Ib)




2) Measure the distance "E" from the transmission
case mating surface to end of bearing with ST.
f = Measured value - 15 mm
ST 398643600 GAUGE

                                                                                                           H3M1841



                                                              C : INSPECTION 55,~,oA,o
                                                              Make sure that the transmission cover has no
                                                              cracks .




3) Calculation equation :




                                                           AT35

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo