Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 AUTOMATIC TRANSMISSION MSA5T0128A34682

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5T0128A34682


>> Download MSA5T0128A34682 documenatation <<

Text preview - extract from the document
                                                       REDUCTION DRIVE GEAR
Automatic Transmission

14. Reduction Drive Gear 55,059,                                          C: DISASSEMBLY                     5570597A06



A   .    REMOVAL            S5f0591A18
                                                                          ,"   FWD     5510597A0601



1) Remove rear vehicle speed sensor, and sepa-                            1) Take out the seal rings.
rate the transmission case and extension case .                           CAUTION:
                                Be careful not to damage the seal rings.
2) Remove the reduction driven gear. 
3) Using ST, extract the reduction drive gear .
ST1 499737100 PULLER
ST2 899524100 PULLER SET                                                                              f~    &




                                                                               (A)   Seal rings
                                                                               (B)   Reduction drive shaft

                                                                          2) Using ST, remove the ball bearing of rear side.
                                                                          ST 498077600 REMOVER

        (A)   Reduction drive gear

B : INSTALLATION                         5570591A11


1) Install the reduction drive gear assembly .
NOTE :
Insert it fully into position until the bearing shoulder
bottoms .


               \- ~\
                                                      (A)
                                                                               (A)   Ball bearing
                                           . `` o                              (B)   Reduction drive gear

                                                                          3) Using a press, remove the reduction drive gear.
                                                      o


                 ~~        \o                   0
                     T~                                     B3M1113B

        (A)   Reduction drive gear

2) Install the reduction driven gear . 
3) Combine the transmission case with the exten-
sion case, and install rear vehicle speed sensor.





                                                                       AT50
                                           REDUCTION DRIVE GEAR
                                                                                                      Automatic Transmission

4) Using a press, remove the ball bearing .                   3) Using a press, remove the reduction drive gear.
ST1 499577000 ADAPTER
ST2 498077600 REMOVER




                                                                 (A)    Reduction drive gear

                                                              D : ASSEMBLY               S51Q59fA02

2. AWD      S570591A0602
                                                              1 . FWD     5570591A0207
1) Take out the seal rings.
                                                              1) Press-fit the ball bearing to the reduction drive
CAUTION:                                                      gear .
Be careful not to damage the seal rings.                      ST 398437700 ADAPTER




   (A)   Seal rings                                              (A)   Ball bearing
   (B)   Reduction drive shaft                                   (B)   Reduction drive gear
2) Using ST, remove the ball bearing .                        2) Press-fit the reduction drive gear.
ST 498077600 REMOVER                                          3) Press-fit the ball bearing to reduction drive
                                                              shaft.
                                                              ST 398437700 ADAPTER
                                      ST



                    - --         i -


                                  I


                                            B3M0962C

   (A)   Ball bearing
   (B)   Reduction drive gear
                                                                (A)    Ball bearing
                                                                (B)    Reduction drive gear




                                                       AT51
                                    REDUCTION DRIVE GEAR
Automatic Transmission

4) Attach two seal rings .
NOTE :
To make subsequent assembly easier, apply vase-
line to the grooves of the shaft and to the exterior
of the seal ring .




   (A)   Seal rings
   (B)   Reduction drive shaft

2. AW D    5570591A0202


1) Press-fit the reduction drive gear to the shaft.
2) Press-fit the ball bearing to the reduction drive
gear.
3) Attach two seal rings .
NOTE :
To make subsequent assembly easier, apply vase-
line to the grooves of the shaft and to the exterior
of the seal ring .




   (A)   Seal rings
   (B)   Reduction drive shaft

E : INSPECTION 55,o59,A,o
* Make sure that each component is free of harm-
ful gouges, cuts, or dust .
e Measure the extension end play and adjust it to
within specifications . 




                                                  AT52



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo