Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 AUTOMATIC TRANSMISSION MSA5T0128A34696
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5T0128A34696 documenatation <<Text preview - extract from the document TRANSMISSION CONTROL DEVICE
Automatic Transmission
28. Transmission Control 10) Remove the oil pan .
Device 5510274
NOTE :
Use a scraper to remove oil pan .
A: REMOVAL S5,o2,aA,8
1) Extract the torque converter clutch assembly.
NOTE :
9 Extract the torque converter clutch horizontally.
Be careful not to scratch the bushing inside the oil
pump shaft.
U(0
Note that oil pump shaft also comes out .
2) Remove the input shaft . ~O[~
3) Disconnect transmission harness connector 0
from stay. B3M2022
NOTE : 11) Remove control valve body assembly. [
it from stay. 12) Pull off the straight pin of manual lever.
4) Disconnect inhibitor switch connector from stay.
5) Disconnect the air breather hoses. ][
6) Wrap vinyl tape around the nipple attached to
the air breather hose .
7) Remove pitching stopper bracket.
8) Remove the inhibitor switch .
13) Remove bolts securing select lever, then
remove select lever, manual lever and parking rod.
CAUTION :
Be careful not to damage the lips of the press-
fitted oil seal in the case.
B3M1087~
9) Prepare a block of wood . Turn the transmission
case over, and support it with the block of wood .
NOTE :
Turn the transmission case in the direction the
inhibitor switch was installed .
(a,) Bolt
(B) Range select lever
(C) Manual lever
(D) Parking rod
AT-1 25
TRANSMISSION CONTROL DEVICE
Automatic Transmission
14) Remove the detention spring . 3) Insert manual lever and parking rod.
0 0
]
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo