Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 BODY AND ELECTRICAL SECTION Body Electrical System MSA5T0126A27947

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5T0126A27947


>> Download MSA5T0126A27947 documenatation <<

Text preview - extract from the document
6-2   [W4C2]                             SERVICE PROCEDURE
5. Front Wiper and Washer


2. HEADLIGHT RELAY                                            5. Front Wiper and Washer
Check continuity between terminals when terminal
No. 4 is connected to battery and terminal No. 3 is
                                                              A: ADJUSTMENT
grounded.                                                     1) Turn the wiper switch to OFF position.
                                                              2) Adjust so that the blades meet the ceramic print
When current    Between terminals                             point mark (A).
                                    Continuity exists.
flows           No. 1 and No. 2
                Between terminals   Continuity does not
When current    No. 1 and No. 2     exist.
does not flow   Between terminals
                                    Continuity exists.
                No. 3 and No. 4




                                                                                                     S6M0049B

                                                              3) Adjust washer ejecting area on windshield
                                                              glass as shown in the figure when vehicle stops.
                                                              Ejecting area:
                                           S6M0048B               A: 350 mm (13.78 in)
                                                                  B: 100 mm (3.94 in)
3. TAIL AND ILLUMINATION RELAY                                    C: 60 mm (2.36 in)
Check continuity between terminals (indicated in
table below) when terminal No. 4 is connected to
battery and terminal No. 3 is grounded.
When current    Between terminals
                                    Continuity exists.
flows           No. 1 and No. 2
                Between terminals   Continuity does not
When current    No. 1 and No. 2     exist.
does not flow   Between terminals
                                    Continuity exists.
                No. 3 and No. 4
                                                                                                     B6M1315A




                                           S6M0048B




                                                          8
                                      SERVICE PROCEDURE                                    [W5B3] 6-2
                                                                               5. Front Wiper and Washer


B: REMOVAL AND INSTALLATION                             3) Disconnect electric connector, and remove
                                                        motor attaching bolts.
1. BLADE
                                                        Tightening torque:
1) Pull out blade following the arrow direction,            5.9



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo