Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 ENGINE SECTION Clutch MSA5T0122A27548

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5T0122A27548 documenatation <<

Text preview - extract from the document
                                    SERVICE PROCEDURE                                         [W6B0] 2-10
                                                                        6. Master Cylinder and Reservoir Tank

6. Master Cylinder and                                  B: DISASSEMBLY
Reservoir Tank                                          1) Remove straight pin and reservoir tank.
1) Thoroughly drain brake fluid from reservoir
2) Remove snap pin, clevis pin and separate push
rod of master cylinder from clutch pedal.


                                                           (A)   Reservoir tank
                                                           (B)   Straight pin

                                                        2) Remove oil sealing.


   (A)   Clevis pin
   (B)   Snap pin
   (C)   Push rod
   (D)   Lock nut

3) Remove clutch pipe from master cylinder.
4) Remove master cylinder with reservoir tank.
Be extremely careful not to spill brake fluid.
Brake fluid spilt on the vehicle body will harm            (A)   Oil seal
the paint surface; wipe it off quickly if spilt.           (B)   Master cylinder

                                                        3) Move the cylinder boot backward.


   (A)   Master cylinder                                                                         S2M0917B
   (B)   Clutch pipe
                                                           (A)   Cylinder boot
                                                           (B)   Master cylinder

                                                        4) Remove snap ring.
                                                        Be careful when removing the snap ring to pre-
                                                        vent the rod, washer, piston and return spring
                                                        from flying out.

2-10    [W6C0]                          SERVICE PROCEDURE
6. Master Cylinder and Reservoir Tank

C: INSPECTION                                                E: INSTALLATION
If any damage, deformation, wear, swelling, rust or          1) Install master cylinder to body, and install clutch
other faults are found on the cylinder, piston, push         pipe to master cylinder.
rod, fluid reservoir, return spring and gasket,              CAUTION:
replace the faulty part.                                     Check that pipe is routed properly.
                                                             Tightening torque:
                                                                 T1: 15+3/-2 N

◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo