Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 ENGINE SECTION Engine Lubrication System MSA5T0122A27589

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5T0122A27589


>> Download MSA5T0122A27589 documenatation <<

Text preview - extract from the document
2-4    [W4A0]                       SERVICE PROCEDURE
4. Oil Cooler (AT Vehicles Only)


4. Oil Cooler (AT Vehicles                              6) Remove oil filter using ST.
                                                        ST 498547000 OIL FILTER WRENCH
Only)
                                                        NOTE:
A: REMOVAL                                              Set container under the vehicle.
1) Lift-up the vehicle.
2) Remove under cover.
3) Drain engine coolant completely. 




                                                                                               S2M0125

                                                        7) Remove connector and remove oil cooler.


                                       B2M0015

4) Remove bolt which installs water pipe to
engine.




                                       S2M0027

5) Disconnect water hose from oil cooler.



                                                                                              S2M0123C


                                                           (A)   Gasket
                                                           (B)   Oil cooler
                                                           (C)   Connector

                                                        B: INSPECTION
                                       S2M0112          1) Check that coolant passages are not clogged
                                                        using air blow method.
                                                        2) Check mating surfaces of cylinder block, O-ring
                                                        groove and oil filter for damage.




                                                   16
                                      SERVICE PROCEDURE                                            [W4C0] 2-4
                                                                                 4. Oil Cooler (AT Vehicles Only)


C: INSTALLATION                                             2) Install oil filter using ST.
                                                            ST 498547000 OIL FILTER WRENCH
1) Install oil cooler on cylinder block with connec-
tor pipe.
Tightening torque:
    T: 54



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo