Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 FUEL AND OBD II Fuel Injection System MSA5T0123A27618

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5T0123A27618 documenatation <<

Text preview - extract from the document
                                   SERVICE PROCEDURE                                   [W8A0] 2-7
                                                                         8. Front Oxygen (A/F) Sensor

4) Connect battery ground cable.                   8. Front Oxygen (A/F) Sensor
                                                   A: REMOVAL
                                                   1) Set the vehicle on the lift.
                                                   2) Disconnect battery ground cable.



                                                   3) Disconnect connector from front oxygen (A/F)


                                                   4) Lift-up the vehicle.
                                                   5) Apply SUBARU CRC or its equivalent to
                                                   threaded portion of front oxygen (A/F) sensor, and
                                                   leave it for one minute or more.
                                                   SUBARU CRC (Part No. 004301003)
                                                   6) Remove front oxygen (A/F) sensor.
                                                   When removing front oxygen (A/F) sensor, do
                                                   not force front oxygen (A/F) sensor especially
                                                   when exhaust pipe is cold, otherwise it will
                                                   damage exhaust pipe.


2-7   [W8B0]                            SERVICE PROCEDURE
8. Front Oxygen (A/F) Sensor

B: INSTALLATION                                           5) Connect battery ground cable.
1) Before installing front oxygen (A/F) sensor,
apply anti-seize compound only to threaded por-
tion of front oxygen (A/F) sensor to make the next
removal easier.
Anti-seize compound:
     SS-30 by JET LUBE
Never apply anti-seize compound to protector
of front oxygen (A/F) sensor.


2) Install front oxygen (A/F) sensor.
Tightening torque:

◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo