Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 GENERAL INFORMATION SECTION Periodic Maintenance Services MSA5T0120A27438
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5T0120A27438 documenatation <<
Text preview - extract from the document
G8040BE1SGML
1-5 [G2A0] PERIODIC MAINTENANCE SERVICES
2. Drive Belt(s) [Except Camshaft] (Inspect drive belt tension)
2. Drive Belt(s) [Except Camshaft]
(Inspect Drive Belt Tension)
MAINTENANCE INTERVAL
[Number of months or km (miles), whichever occurs first]
Months 3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
1,000
4.8 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 192
km
1,000
3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
miles
I I I R
A: INSPECTION B: REPLACEMENT
1) Replace belts, if cracks, fraying or wear is 1. V-BELT COVER
found. 1) Remove V-belt cover.
2) Check drive belt tension and adjust it if nec-
essary by changing alternator installing posi-
tion and/or idler pulley installing position.
Belt tension
(A)
replaced: 7 -- 9 mm (0.276 -- 0.354 in)
reused: 9 -- 11 mm (0.354 -- 0.433 in)
(B)*
replaced: 7.5 -- 8.5 mm
(0.295 -- 0.335 in)
reused: 9.0 -- 10.0 mm (0.354 -- 0.394 in)
*: There is no belt [B] on models without an air conditioner. H1H0458
2. FRONT SIDE BELT (Driving Power Steer-
ing Oil Pump and Alternator)
CAUTION:
Wipe off any oil or water on the belt and
pulley.
1) Loosen the lock bolt on the slider bolt.
2) Loosen the slider bolt.
3) Remove the front side belt.
4) Install a new belt, and tighten the slider bolt
B1H0163 so as to obtain the specified belt tension.
C/P Crankshaft pulley 5) Tighten the lock bolt.
GEN Generator 6) Tighten the slider bolt.
P/S Power steering oil pump pulley
A/C Air conditioning compressor pulley Tightening torque:
I/P Idler pulley Lock bolt, through bolt:
25 ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo