Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 GENERAL INFORMATION SECTION Periodic Maintenance Services MSA5T0120A27442

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5T0120A27442


>> Download MSA5T0120A27442 documenatation <<

Text preview - extract from the document
                              G8040BE1SGML



1-5     [G6A1]              PERIODIC MAINTENANCE SERVICES
6. Replace Engine Coolant and Inspect Cooling System, Hoses and Connections


6. Replace Engine Coolant and
Inspect Cooling System, Hoses
and Connections
                                         MAINTENANCE INTERVAL
                             [Number of months or km (miles), whichever occurs first]
  Months    3    7.5   15   22.5    30   37.5   45     52.5   60    67.5   75    82.5   90    97.5   105 112.5 120
   1,000
           4.8   12    24   36      48    60    72     84     96    108    120    132   144   156    168   180   192
   km
   1,000
            3    7.5   15   22.5    30   37.5   45     52.5   60    67.5   75    82.5   90    97.5   105 112.5 120
   miles
                                    P                          P                        P                        P


A: REPLACEMENT
1. REPLACEMENT OF COOLANT
WARNING:
The radiator is of the pressurized type. Do
not attempt to open the radiator cap immedi-
ately after the engine has been stopped.
1) Lift up the vehicle.
2) Remove undercover.
3) Fit vinyle tube to drain pipe.
                                                                                                           S1H0118A


                                                            9) Fill engine coolant into radiator up to filler
                                                            neck position.
                                                            10)Fill engine coolant into reservoir tank up to
                                                            "FULL" level.
                                                            Coolant capacity (fill up to "FULL" level)
                                                               Approx. 6.0 (6.3 US qt, 5.3 Imp qt)
                                                            CAUTION:
                                                            The SUBARU Genuine Coolant containing
                                            S1H0118A        anti-freeze and anti-rust agents is especially
                                                            made for SUBARU engine, which has an alu-
4) Place a container under vinyle tube.                     minum crankcase. Always use SUBARU
5) Loosen drain cock to drain engine coolant                Genuine Coolant, since other coolant may
into container.                                             cause corrosion.
6) For quick draining, open radiator cap.
                                                            11)Securely install radiator cap and reservoir
CAUTION:                                                    tank cap.
Be careful not to spill coolant on the floor.               12)Run engine for more than five minutes at
7) Drain coolant from reservoir tank.                       2,000 to 3,000 rpm. (Run engine until radiator
8) Tighten radiator drain plug securely after               becomes hot in order to purge air trapped in
draining coolant. (Drain tube may face down-                cooling system.)
ward.)                                                      13)Stop engine and wait until coolant tempera-
                                                            ture lowers. Then open radiator cap to check
                                                            coolant level and add coolant up to radiator fill-




                                                       12
                    G8040BE1SGML



                          PERIODIC MAINTENANCE SERVICES                                    [G6A3]    1-5
                              6. Replace Engine Coolant and Inspect Cooling System, Hoses and Connections


er neck. Next, add coolant into reservoir tank up    3. PROCEDURE TO ADJUST THE CON-
to "FULL" level.                                     CENTRATION OF THE COOLANT
14)Securely install radiator and reservoir tank      To adjust the concentration of the coolant ac-
caps.                                                cording to temperature, find the proper fluid
2. RELATIONSHIP OF SUBARU COOLANT                    concentration in the above diagram and re-
CONCENTRATION AND FREEZING TEM-                      place the necessary amount of coolant with an
PERATURE                                             undiluted solution of SUBARU genuine coolant
The concentration and safe operating tempera-        (concentration 50).
ture of the SUBARU coolant is shown in the dia-      The amount of coolant that should be replaced
gram. Measuring the temperature and specific         can be determined using the diagram.
gravity of the coolant will provide this informa-    [Example]
tion.                                                Assume that the coolant concentration must be
[Example]                                            increased from 25% to 40%. Find point A, where
If the coolant temperature is 25



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo