Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 GENERAL INFORMATION SECTION Periodic Maintenance Services MSA5T0120A27449
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5T0120A27449 documenatation <<
Text preview - extract from the document
G8040BE1SGML
PERIODIC MAINTENANCE SERVICES [G13A1] 1-5
13. Disc Brake Pads and Discs/Front and Rear Axle Boots and Axle Shaft Joint Portions
13. Disc Brake Pads and Discs/
Front and Rear Axle Boots and
Axle Shaft Joint Portions
MAINTENANCE INTERVAL
[Number of months or km (miles), whichever occurs first]
Months 3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
1,000
4.8 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 192
km
1,000
3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
miles
I I I I I I I I
A: INSPECTION
1. DISC BRAKE PAD AND DISC
1) Jack up vehicle and support with rigid
racks. Then remove wheels.
2) Visually check pad thickness through in-
spection hole of disc brake assembly. Replace
pad if necessary.
H1H0464A
3) Check the disc rotor, and correct or replace
if it is damaged or worn.
Brake disc thickness mm (in)
Front Rear
Standard 24 (0.94) 10 (0.39)
Wear limit 22 (0.87) 8.5 (0.335)
S1H0041A
4) Measure the disc rotor runout at a point less
Pad thickness including back metal mm (in) than 5 mm (0.20 in) from the outer periphery of
Front Rear
the rotor.
Standard 17 (0.67) 14 (0.55) Disc rotor runout limit:
Service limit 7.5 (0.295) 6.5 (0.256) Front: 0.075 mm (0.00295 in)
Rear: 0.070 mm (0.00275 in)
Service limit 1.5 (0.059) 1.5 (0.059)
(exclusive back CAUTION:
metal) When replacing a pad, always replace the
pads for both the left and right wheels at the
same time. Also replace pad clips if they are
twisted or worn.
25
G8040BE1SGML
1-5 [G13A2] PERIODIC MAINTENANCE SERVICES
13. Disc Brake Pads and Discs/Front and Rear Axle Boots and Axle Shaft Joint Portions
G1H0097
2. FRONT AND REAR AXLE BOOTS
Inspect front and rear axle boots for deforma-
tion, damage or failure. If faulty, replace them
with new ones.
S1H0042A
S1H0043A
26
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo