Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 GENERAL INFORMATION SECTION Periodic Maintenance Services MSA5T0120A27454
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5T0120A27454 documenatation <<Text preview - extract from the document G8040BE1SGML
PERIODIC MAINTENANCE SERVICES [G18A2] 1-5
18. Front and Rear Wheel Bearing Lubricant
18. Front and Rear Wheel Bearing
Lubricant
MAINTENANCE INTERVAL
[Number of months or km (miles), whichever occurs first]
Months 3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
1,000
4.8 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 192
km
1,000
3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
miles
(I) (I)
A: INSPECTION
1. FRONT WHEEL BEARING
NOTE:
Inspect the condition of front wheel bearing
grease.
1) Jack up the front of vehicle.
2) While holding front wheel by hand, swing it
in and out to check bearing free play.
3) Loosen wheel nuts and remove front wheel.
4) If bearing free play exists, attach a dial
B1H0062A
gauge to hub and measure axial displacement
in axial direction.
2. REAR WHEEL BEARING
Service limit:
Straight-ahead position within 0.05 mm NOTE:
(0.0020 in) Inspect the condition of rear wheel bearing
grease.
5) Remove bolts and self-locking nuts, and ex-
tract transverse link from front crossmember. 1) Jack up the rear of vehicle.
6) While lightly hammering spring pin which 2) While holding rear wheel by hand, swing it
secures DOJ to transmission spindle, remove it. in and out to check bearing free play.
7) Extract DOJ from transmission spindle. 3) Loosen wheel nuts and remove rear wheel.
4) If bearing free play exists in step 2) above,
8) While supporting front drive shaft horizontal- attach a dial gauge to hub and measure axial
ly with one hand, turn hub with the other to displacement in axial direction.
check for noise or binding. Service limit:
If hub is noisy or binds, disassemble front axle Straight-ahead position within 0.05 mm
and check condition of oil seals, bearing, etc. (0.0020 in)
5) Turn hub by hand to check for noise or bind-
ing. If hub is noisy or binds, disassemble rear
axle and check condition of oil seals, bearings,
etc.
6) Remove bolts and self-locking nuts, and re-
move front lateral link from cross member.
39
G8040BE1SGML
1-5 [G18A2] PERIODIC MAINTENANCE SERVICES
18. Front and Rear Wheel Bearing Lubricant
7) Remove the DOJ of rear drive shaft from rear
differential.
8) While supporting rear drive shaft horizontal-
ly with one hand, turn hub with the other to
check for noise or binding.
If hub is noisy or binds, disassemble rear axle
and check condition of oil seals, bearings, etc.
B1H0064B
40
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo