Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 TRANSMISSION AND DIFFERENTIAL SECTION Automatic Transmission and Differential MSA5T0124A27699
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5T0124A27699 documenatation <<
Text preview - extract from the document
SERVICE PROCEDURE [W3A0] 3-2
3. Sensor (in transmission)
6) Install snap pin to range select lever. 2) Disconnect transmission connector.
B3M1029C S2M0212B
(A) Snap pin (A) Transmission harness connector
(B) Select cable
(C) Range select lever 3) Check each sensor, solenoid and ground sys-
tem for short circuits.
7) Install front exhaust pipe.
8) Connect inhibitor switch connector.
S3M0039B
B3M1028B (A) Transmission connector
(A) Inhibitor switch
9) Install air cleaner case and duct.
3. Sensor (in transmission)
A: INSPECTION
1) Remove air cleaner case and duct.
35
3-2 [W3A0] SERVICE PROCEDURE
3. Sensor (in transmission)
B3M1035A
(A) Torque converter turbine speed (E) Line pressure duty solenoid (J) Shift solenoid 2
sensor (F) Lock-up duty solenoid (K) 2-4 brake timing solenoid
(B) Vehicle speed sensor 2 (Front) (G) Transfer duty solenoid (L) Low clutch timing solenoid
(C) Vehicle speed sensor 1 (Rear) (H) 2-4 brake duty solenoid (M) Transmission connector
(D) ATF temperature sensor (I) Shift solenoid 1
36
SERVICE PROCEDURE [W4A0] 3-2
4. Shift Solenoid, Duty Solenoid and Valve
1. EVALUATION 4. Shift Solenoid, Duty
NOTE: Solenoid and Valve
If part is faulty, its resistance value will be different
from the standard value indicated. A: REMOVAL
Part name Terminal Resistance () 1) Clean transmission exterior.
Vehicle speed sensor 1 17 -- 18 450 -- 650 2) Drain ATF completely.
Vehicle speed sensor 2 19 -- 20 450 -- 650 NOTE:
2,100 -- 2,900/ Tighten ATF drain plug after draining ATF.
20 ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo