Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 TRANSMISSION AND DIFFERENTIAL SECTION Automatic Transmission and Differential MSA5T0124A27713

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5T0124A27713


>> Download MSA5T0124A27713 documenatation <<

Text preview - extract from the document
                                     SERVICE PROCEDURE                                        [W17C0] 3-2
                                                                                        17. Drive Pinion Shaft


17. Drive Pinion Shaft                                    C: ASSEMBLY
A: DISASSEMBLY                                            1) Measure dimension "A" of the drive pinion
                                                          shaft.
1) Straighten the staked portion of the lock nut,         ST 398643600 GAUGE
and remove the lock nut while locking the rear
spline portion of the shaft with ST1 and ST2. Then
pull off the drive pinion collar.
ST1 498937110 HOLDER
ST2 499787700 WRENCH
ST3 499787500 ADAPTER




                                                                                                  B3M1176A

                                                          2) Using a press, force-fit the roller bearing in
                                                          position.
                                                          CAUTION:
                                                          Do not change the relative positions of the
                                      B3M0587A            outer race and bearing cone.
2) Remove the O-ring.
3) Using a press, separate the rear roller bearing
and outer race from the shaft.




                                                                                                  S3M0489A

                                                             (A)   Drive pinion shaft
                                                             (B)   Roller bearing
                                       S3M0487
                                                          3) After fitting the O-ring to the shaft, attach the
4) Using a press and ST, separate the front roller        drive pinion collar to the shaft.
bearing from the shaft.
                                                          CAUTION:
ST 498517000 REPLACER
                                                          Be careful not to damage the O-ring.




                                      S3M0488A



B: INSPECTION
Make sure that all component parts are free of
harmful cuts, gouges, and other faults.

                                                     91
3-2   [W17C0]                        SERVICE PROCEDURE
17. Drive Pinion Shaft


4) Tighten the lock washer and lock nut with ST1,         7) Measure dimension "B" of the drive pinion
ST2 and ST3.                                              shaft.
ST1 498937110 HOLDER                                      ST 398643600 GAUGE
ST2 499787700 WRENCH
ST3 499787500 ADAPTER
Actual tightening torque:
    116



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo