Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 1999-2000 TRANSMISSION AND DIFFERENTIAL SECTION Automatic Transmission and Differential MSA5T0124A27717
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5T0124A27717 documenatation <<Text preview - extract from the document3-2 [W21A0] SERVICE PROCEDURE
21. Transfer Clutch
21. Transfer Clutch 4) Remove the snap ring with ST1, ST2 and ST3,
and take out the return spring and transfer clutch
A: DISASSEMBLY piston seal.
1) Remove the seal ring. ST1 399893600 PLIERS
ST2 398673600 COMPRESSOR
CAUTION: ST3 398623600 SEAT
Be careful not to damage the seal ring.
B3M1415B
S3M0493A
5) Apply compressed air to the rear drive shaft to
(A) Seal ring remove the piston.
2) Using a press and ST, remove the ball bearing.
CAUTION:
Do not reuse the bearing.
ST 498077600 REMOVER
G3M0497
B: INSPECTION
1) Check the drive plate facing for wear and dam-
S3M0494A age.
2) Check the snap ring for wear, return spring for
3) Remove the snap ring, and take out the pres- permanent set and breakage, and return spring for
sure plate, drive plates, and driven plates. deformation.
3) Check the lathe cut ring for damage.
C: ASSEMBLY
1) Install the transfer clutch piston.
S3M0495
B3M1400
108
SERVICE PROCEDURE [W21C0] 3-2
21. Transfer Clutch
2) Install return spring to transfer piston. 6) Using ST1 and ST2, install snap ring to rear
drive shaft.
NOTE:
After installing snap ring, remove ST1 and ST2.
ST1 499257300 SNAP RING OUTER GUIDE
ST2 499247400 INSTALLER
B3M1177
3) Install transfer clutch piston seal.
B3M1181B
7) Install the driven plates, drive plates, pressure
plate and snap ring.
B3M1401
4) Install ST to rear drive shaft.
ST 499257300 SNAP RING OUTER GUIDE
B3M1182
8) Apply compressed air to see if the assembled
parts move smoothly.
B3M1402B
5) Install snap ring to ST.
ST 499257300 SNAP RING OUTER GUIDE
G3M0502
B3M1180B
109
3-2 [W21C0] SERVICE PROCEDURE
21. Transfer Clutch
9) Check the clearance. 11) Coat the seal ring with vaseline, and install it
NOTE: in the seal ring groove of the shaft.
Before measuring clearance, place the same thick- CAUTION:
ness of shim on both sides to prevent pressure Do not expand the seal ring excessively when
plate from tilting. installing.
If the clearance is not within the specified range, ST 899580100 INSTALLER
select a proper pressure plate.
Standard value:
0.2 -- 0.6 mm (0.008 -- 0.024 in)
Allowable limit:
1.6 mm (0.063 in)
S3M0499A
(A) Seal ring
G3M0503
Available pressure plates
Part No. Thickness mm (in)
31593AA151 3.3 (0.130)
31593AA161 3.7 (0.146)
31593AA171 4.1 (0.161)
31593AA181 4.5 (0.177)
10) Press-fit the ball bearing with ST.
ST 899580100 INSTALLER
S3M0496A
110
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo