Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 4 - Chassis Brake Rear Disc Rotor
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Rear Disc Rotor documenatation <<Text preview - extract from the document REAR DISC ROTOR
BRAKE
6. Rear Disc Rotor (2) If the disc rotor seizes up within hub, drive
the disc rotor out by installing an 8 mm bolt in
A: REMOVAL holes B on rotor.
1) Lift-up the vehicle, and then remove the wheels.
2) Pull down and release the parking brake.
3) Remove the two mounting bolts, and then re-
move the disc brake assembly.
B
A
BR-00036
B: INSTALLATION
1) Install in the reverse order of removal.
BR-00124
2) Adjust the parking brake.
not stretched.
5) Remove the disc rotor. C: INSPECTION
1) Check bearing axial end play and hub runout be-
NOTE: fore disc rotor runout limit inspection.
two methods in order.
2) Secure the disc rotor by tightening five wheel
(1) Turn the adjusting screw using a flat tip nuts.
screwdriver until brake shoe gets away enough 3) Set a dial gauge 10 mm (0.39 in) inward of rotor
from the disc rotor. outer perimeter. Turn the disc rotor to check runout.
If the disc rotor runout is above specified value, re-
(2) place the disc rotor.
Disc rotor runout limit:
(3)
0.070 mm (0.0027 in)
(1)
(4)
BR-00155
(1) Adjusting screw
(2) Cover
(3) Flat tip screwdriver
(4) Back plate BR-00037
BR-22
REAR DISC ROTOR
BRAKE
4) Set a micrometer 10 mm (0.39 in) inward of the
rotor outer perimeter, and then measure the disc
rotor thickness. If the thickness of disc rotor is out-
side the service limit, replace the disc rotor.
B
A
BR-00036
Standard Service Disc outer
value limit dia.
Disc rotor 10 mm 8.5 mm 266 mm
thickness A (0.39 in) (0.335 in) (10.47 in)
BR-23
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo