Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 4 - Chassis Differentials Rear Differential
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Rear Differential documenatation <<Text preview - extract from the document REAR DIFFERENTIAL
DIFFERENTIALS
4. Rear Differential 12) Secure the rear drive shaft to rear crossmem-
ber using wire.
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Move the select lever or gear shift lever to "N".
4) Release the parking brake.
5) Loosen the wheel nuts.
6) Jack-up the vehicle and support it with sturdy
racks.
7) Remove the wheels.
8) Remove the rear exhaust pipe and muffler.
DI-00053
Non-turbo model
and
(A)
Turbo model
and
9) Remove the propeller shaft.
10) Remove the clamps and bracket of parking
brake cable.
DI-00211
(A) Lower bracket
14) Support the rear differential with transmission
jack.
DI-00051
11) Remove the DOJ of rear drive shaft from rear
differential using ST.
ST 28099PA100 DRIVE SHAFT REMOVER
DI-00055
15) Remove the self-locking nuts and bolts.
ST
(A) DI-00052
(A) Bolt DI-00056
DI-18
REAR DIFFERENTIAL
DIFFERENTIALS
16) Remove the bolts which secure rear differential B: INSTALLATION
front member to body. Install in the reverse order of removal.
Loosen the bolt A first, then remove the bolts B. 1) Position the front member on body by passing it
NOTE: under the parking brake cable and securing to rear
Support the front member with use of a helper to differential.
prevent it from dropping. NOTE:
When installing the rear differential front member,
do not confuse the installation sequence of the up-
per and lower stoppers.
2) Install the DOJ of drive shaft into rear differential.
ST 28099PA090 SIDE OIL SEAL PROTEC-
(A) (B) TOR
DI-00057
(A) Bolt A
(B) Bolt B
17) Remove the bolt A.
18) While slowly lowering the transmission jack,
ST
move the rear differential forward and remove front
member and rear differential from body.
DI-00060
3) Installing procedure hereafter is in the reverse
order of removal.
4) After installation, fill the differential carrier with
gear oil to the filler plug level.
C: DISASSEMBLY
To detect the real cause of trouble, inspect the fol-
lowing items before disassembling.
DI-00058
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo