Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 4 - Chassis Drive Shaft System Rear Axle
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Rear Axle documenatation <<Text preview - extract from the document REAR AXLE
DRIVE SHAFT SYSTEM
4. Rear Axle 8) Disconnect the parking brake cable end from the
parking lever.
A: REMOVAL
1. DISC BRAKE
1) Disconnect the ground cable from battery.
2) Lift-up the vehicle, and remove the rear wheel.
3) Unlock the axle nut.
4) Remove the axle nut using a socket wrench with
brake pedal depressed.
CAUTION:
(1)
Remove the axle nut with vehicle weight not ap- DS-00065
plied on axle. Failure to follow this rule may
damage the wheel bearings. (1) Cable end
5) Return the parking brake lever and loosen ad-
justing nut. 9) Disconnect the rear stabilizer from rear lateral
link.
10) Remove the bolts which secure trailing link as-
sembly to rear housing.
(2) (1)
(3)
PB-00010
(1) Parking brake lever
(2) Lock nut DS-00066
(3) Adjusting nut 11) Remove the bolts which secure lateral assem-
bly to rear housing.
6) Remove the disc brake caliper from back plate,
and suspend it from strut using a piece of wire.
DS-00067
DS-00064
7) Remove the disc rotor from hub.
NOTE:
If the disc rotor seizes up within hub, drive it out by
installing an 8 mm (0.31 in) bolt into bolt hole in disc
rotor.
DS-25
REAR AXLE
DRIVE SHAFT SYSTEM
12) Remove the rear ABS wheel speed sensor 2. DRUM BRAKE
from back plate.
1) Disconnect the ground cable from battery.
2) Lift-up the vehicle, and remove rear wheel.
3) Unlock the axle nut.
4) Remove the axle nut using a socket wrench with
parking brake applied.
CAUTION:
Remove the axle nut with vehicle weight not ap-
plied on axle. Failure to follow this rule may
(1) damage the wheel bearings.
5) Return the parking brake lever and loosen ad-
DS-00069 justing nut.
(1) ABS wheel speed sensor
13) Disengage the BJ assembly from housing
splines, and then remove the rear drive shaft as-
sembly. (2) (1)
If it is hard to remove, use the STs.
(3)
ST1 926470000 AXLE SHAFT PULLER
ST2 927140000 AXLE SHAFT PULLER
PLATE
CAUTION: PB-00010
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo