Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 4 - Chassis Rear Suspension Rear Trailing Link
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Rear Trailing Link documenatation <<
Text preview - extract from the document
REAR TRAILING LINK
REAR SUSPENSION
4. Rear Trailing Link C: DISASSEMBLY
A: REMOVAL 1. FRONT BUSHING
1) Loosen the rear wheel nuts. Using the ST, press the front bushing out of place.
2) Lift-up the vehicle, and then remove the rear ST 927720000 INSTALLER & REMOVER
wheels. SET
3) Remove both the rear parking brake clamp and
ABS wheel speed sensor harness. (1)
4) Remove the bolt which secures trailing link to
trailing link bracket.
(2) ST
RS-00013
(1) Trailing link
5) Remove the bolt which secures trailing link to
rear housing.
B: INSTALLATION
1) Install in the reverse order of removal.
RS-00014
2) Always tighten the rubber bushing location when
wheels are in full contact with the ground and vehi- (1) Press
cle is at curb weight condition.
(2) Trailing link
NOTE:
Check the wheel alignment and adjust if necessary.
RS-10
REAR TRAILING LINK
REAR SUSPENSION
2. REAR BUSHING D: ASSEMBLY
1) Remove the housing.
2) Using the ST, press the rear bushing out of Using the ST, press the bushing into trailing link.
place. ST 927720000 INSTALLER & REMOVER
ST 927730000 INSTALLER & REMOVER SET
SET CAUTION:
Turn the ST plunger upside down and press it
until the plunger end surface contacts trailing
link end surface.
(1)
(2) ST
(3)
RS-00015
(1) Press
(2) Housing
RS-00017
(1) Press
(2) Front bushing
(3) Trailing link
RS-11
REAR TRAILING LINK
REAR SUSPENSION
2. REAR BUSHING 2) Press the ST plunger until bushing flange pro-
trudes beyond trailing link.
1) Using the ST, press the bushing into trailing link.
ST 927730000 INSTALLER & REMOVER
ST 927730000 INSTALLER & REMOVER
SET
SET
NOTE: ST
If it is difficult to press the bushing into trailing link,
(1)
apply water-diluted TIRE LUBE to the inner surface
of ST as a lubricant.
Specified lubricant:
TIRE LUBE: water = 1: 3
(1)
ST
(2)
RS-00019
(1) Plunger
(2) Flange
RS-00018
(1) Press
RS-12
REAR TRAILING LINK
REAR SUSPENSION
3) Turn the trailing link upside down. Press the ST
plunger in the opposite direction that outlines in the
former procedure until bushing is correctly posi-
tioned in trailing link.
ST 927730000 INSTALLER & REMOVER
SET
RS-00020
(1) Press
(2) Plunger
4) Install the housing.
E: INSPECTION
Check the trailing links for bends, corrosion or dam-
age.
RS-13
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo