Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 5 - Body Lighting System Interior Light System
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Interior Light System documenatation <<Text preview - extract from the document INTERIOR LIGHT SYSTEM
LIGHTING SYSTEM
7. Interior Light System
A: WIRING DIAGRAM
1. INTERIOR LIGHT
B: INSPECTION
1. DOOR SWITCH
Measure the door switch resistance.
1
2
3
LI-00007
Switch position Terminal No. Standard
When door is
Less than 1
opened
1 and 3
When door is
More than 1 M
closed
2. REAR GATE LATCH SWITCH
Measure the rear gate latch switch resistance.
Switch position Terminal No. Standard
When rear gate is
Less than 1
opened
1 and 2
When rear gate is
More than 1 M
closed
LI-8
COMBINATION SWITCH (LIGHT)
LIGHTING SYSTEM
8. Combination Switch (Light) C: INSPECTION
Measure the combination switch resistance.
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover.
3) Remove the screws which secure upper column
cover to lower column cover.
(A)
8 7 6 5 4 3 2 1
17 16 15141312 11 10 9
LI-00009
4) Disconnect the connector from combination
(B)
switch. 2 1
5) Remove the screws which secure switch, and 4 3
then remove the switch.
LI-00052
(A) Lighting & turn signal switch connector
(B) Parking switch connector
1. LIGHTING SWITCH
Switch position Terminal No. Standard
OFF -- More than 1 M
Tail 14 and 16 Less than 1
LI-00068
Head 13, 14 and 16 Less than 1
B: INSTALLATION
Install in the reverse order of removal. 2. DIMMER AND PASSING SWITCH
Switch position Terminal No. Standard
Passing 7, 8 and 16 Less than 1
Low beam 16 and 17 Less than 1
High beam 7 and 16 Less than 1
3. TURN SIGNAL SWITCH
Switch position Terminal No. Standard
Left 1 and 2 Less than 1
Neutral -- More than 1 M
Right 2 and 3 Less than 1
4. PARKING SWITCH
Switch position Terminal No. Standard
OFF 2 and 4 Less than 1
ON 1 and 4 Less than 1
LI-9
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo