Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 5 - Body Lighting System Turn Signal and Hazard Light System

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Turn Signal and Hazard Light System


>> Download Turn Signal and Hazard Light System documenatation <<

Text preview - extract from the document
                        TURN SIGNAL AND HAZARD LIGHT SYSTEM
                                                                LIGHTING SYSTEM

4. Turn Signal and Hazard Light
   System
A: WIRING DIAGRAM
1. TURN SIGNAL LIGHT AND HAZARD
LIGHT

B: INSPECTION
1. TURN SIGNAL SWITCH

2. HAZARD SWITCH
Measure the hazard switch resistance.




                                    4 3 2 1
                                    8 7 6 5




                                              LI-00002

  Switch position    Terminal No.        Standard
       OFF             6 and 7         Less than 1 
                      1, 3 and 4       Less than 1 
       ON
                       7 and 8         Less than 1 

3. TURN SIGNAL AND HAZARD MODULE
Connect the battery and turn signal light bulb to the
module, as shown in the figure. The module is
properly functioning if it blinks when power is sup-
plied to the circuit.




                                              LI-00003




                                                         LI-5
                                         BACK-UP LIGHT SYSTEM
LIGHTING SYSTEM

5. Back-up Light System                                         2. INHIBITOR SWITCH (AT MODEL)
A: WIRING DIAGRAM                                               Measure the inhibitor switch resistance.

1. BACK-UP LIGHT
                                                                                  12 11 10 9 8 7

B: INSPECTION
1. BACK-UP LIGHT SWITCH (MT MODEL)
Measure the back-up light switch resistance.
                                                                                                             LI-00005

             (A)
                            2 1                                   Switch position         Terminal No.     Standard
                                                                 When select lever
                                                                 is set in "R" posi-                     Less than 1 
                                                                         tion                1 and 2
                                                                  Other positions                        More than 1 M




             (B)
                            2 1
                            4 3




                                             LI-00317

       (A) Non-turbo model
       (B) Turbo model

 Switch position        Terminal No.       Standard
When shift lever is   Non-turbo model:
  set in reverse          1 and 2        Less than 1 
     position          Turbo model:
 Other positions          2 and 4        More than 1 M




                                                         LI-6



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo