Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 5 - Body Seat Belt System Rear Seat Belt
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Rear Seat Belt documenatation <<Text preview - extract from the document REAR SEAT BELT
SEAT BELT SYSTEM
5. Rear Seat Belt 8) Remove the two bolts and adjustable anchor as-
sembly.
A: REMOVAL
1. OUTER BELT RH AND LH
1) Remove the luggage floor mat.
2) Remove the rear seat.
3) Remove the rear quarter trim.
4) Remove the seat belt lower anchor bolt.
SB-00011
2. OUTER BELT CENTER
1) Remove the anchor cover. Remove the bolt and
then detach the shoulder anchor from pillar.
SB-00008
5) Remove the anchor cover. Remove the bolt and
shoulder anchor from pillar.
SB-00009
2) Remove the strut cap.
3) Remove the rear rail trim.
4) Remove the rear pillar upper trim.
5) Remove the rear skirt trim.
6) Remove the rear quarter trim. 42, REMOVAL, Rear Quarter Trim.>
7) Remove the bolts, and then detach the outer belt 7) Remove the cover (B) while detaching snap lock
side. carefully. Put the outer belt center tongue (A) out to
the other side of the trim through the hole.
SB-00010
SB-00012
8) Remove the clips and hang down rear end of
roof trim.
SB-9
REAR SEAT BELT
SEAT BELT SYSTEM
9) Disconnect the harness and connector, and then 3. INNER BELT
remove the outer belt center assembly.
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
Tightening torque:
C: INSPECTION
SB-00036
1. OUTER BELT RH AND LH
Check for the following, and replace with new parts
3. INNER BELT if necessary.
1) Remove the rear cushion.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo