Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 1 - General Information Section PERIODIC MAINTENANCE SERVICES Disc Brake Pads and Discs

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
Disc Brake Pads and Discs

>> Download Disc Brake Pads and Discs documenatation <<

Text preview - extract from the document
                                        DISC BRAKE PADS AND DISCS
                                                                              PERIODIC MAINTENANCE SERVICES

20.Disc Brake Pads and Discs                                   3) Check the disc rotor, and correct or replace if it is
                                                               damaged or worn.
                                                                                 Brake disc thickness          mm (in)
1. DISC BRAKE PAD AND DISC                                                              Front              Rear
1) Lift-up the vehicle. Then remove the wheels.                Standard               24 (0.94)          10 (0.39)
2) Visually check the pad thickness through inspec-            Wear limit             22 (0.87)         8.5 (0.335)
tion hole of disc brake assembly. Replace the pad if           4) Remove the caliper body.  
When replacing a pad, always replace the pads                  5) Tighten the wheel nuts to secure disk rotor.
for both the right and left wheels at the same                 6) Set a dial gauge at a point less than 10 mm (0.39
time. Also replace the pad clips if they are twist-            in) from outer periphery of rotor, and then measure
ed or worn.                                                    the disk rotor runout.
                                                               Disc rotor runout limit:
                                                                 Front: 0.075 mm (0.0030 in)
                                                                 Rear: 0.070 mm (0.0028 in)



       (A) Inspection hole

             Pad thickness including back metal    mm (in)                                               PM-00051

                              Front             Rear
Standard                    17 (0.67)         14 (0.55)
Wear limit                 7.5 (0.295)       6.5 (0.256)



       (A) Thickness of pad
       (B) Back metal
       (C) Lining


◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo