Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 2 - Engine Section (H4SO) FUEL INJECTION (FUEL SYSTEMS) Fuel Injector

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Fuel Injector


>> Download Fuel Injector documenatation <<

Text preview - extract from the document
                                            FUEL INJECTOR
FUEL INJECTION (FUEL SYSTEMS)

14.Fuel Injector                                        (3) Remove the bolts which install the power
                                                        steering pump to the bracket.
A: REMOVAL
1. RH SIDE
1) Release the fuel pressure.

2) Open the fuel filler flap lid, and remove the fuel
filler cap.
3) Disconnect the ground cable from battery.
                                                                                         FU-00139

                                                        (4) Disconnect the connector from the power
                                                        steering pump switch.




                                        FU-00009

4) Remove the resonator chamber. 
5) Remove the spark plug cords from the spark
plugs (#1 and #3 cylinders).                                                             FU-00017

                                                        (5) Remove the power steering tank from the
                                                        bracket by pulling it upwards.




                                        FU-00302

6) Remove the power steering pump and reservoir
tank from the brackets.                                                                  FU-00020

   (1) Remove the front side V-belt.                        voir tank on the right side wheel apron.
   (2) Remove the bolts which hold the power
   steering pipes onto the intake manifold protec-
   tor.




                                                                                         FU-00021



                                        FU-00255




                                              FU(H4SO)-36
                                           FUEL INJECTOR
                                                                      FUEL INJECTION (FUEL SYSTEMS)

7) Remove the fuel pipe protector RH.                 10) Remove the fuel injector from the intake mani-
                                                      fold.
                                                         (1) Remove the fuel injector securing clip.




                                        FU-00267

8) Disconnect the connector from fuel injector.
                                                                                             FU-00305

                                                        (2) Remove the fuel injector while lifting up the
                                                        fuel injector pipe.




                                        FU-00303

9) Remove the bolt which holds the injector pipe to
the intake manifold.
                                                                                             FU-00306




                                        FU-00284




                                        FU-00304




                                              FU(H4SO)-37
                                            FUEL INJECTOR
FUEL INJECTION (FUEL SYSTEMS)

2. LH SIDE                                              8) Move the washer tank, and secure it away from
                                                        the working area.
1) Release the fuel pressure. 
2) Open the fuel filler flap lid, and remove the fuel
filler cap.
3) Disconnect the ground cable from battery.




                                                                                                 FU-00192

                                                        9) Remove the spark plug cords from the spark
                                                        plugs (#2 and #4 cylinders).


                                        FU-00009

4) Remove the two bolts which install the washer
tank on the body.




                                                                                                 FU-00307

                                                        10) Remove the fuel pipe protector LH.



                                        FU-00190

5) Disconnect the connector from the front window
washer motor.
6) Disconnect the connector from the rear gate
glass washer motor.

                                                                                                 FU-00266

                                                        11) Disconnect the connector from the fuel injector.




                                        FU-00191

7) Disconnect the rear window glass washer hose
from the washer motor, then plug the connection
with a suitable cap.                                                                             FU-00308




                                              FU(H4SO)-38
                                         FUEL INJECTOR
                                                                       FUEL INJECTION (FUEL SYSTEMS)

12) Remove the bolt which holds the injector pipe       (2) Remove the fuel injector while lifting up the
to the intake manifold.                                 fuel injector pipe.




                                      FU-00309                                                       FU-00313

                                                     B: INSTALLATION
                                                     1. RH SIDE
                                                     Install in the reverse order of removal.
                                                     NOTE:
                                                     Replace O-rings with new ones.



                                      FU-00310

13) Remove the bolt which holds the fuel pipe on
                                                                                                  (A)
the left side intake manifold.
                                                                                                (A)
                                                                                               (B)
                                                                                         (A)


                                                                                                     FU-01112

                                                            (A) O-ring
                                                            (B) Fuel injector

                                                     Tightening torque:
                                                       5.0 N



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo