Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 2 - Engine Section (H4SO) Speed Control System Accelerator Pedal
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Accelerator Pedal documenatation <<
Text preview - extract from the document
ACCELERATOR PEDAL
SPEED CONTROL SYSTEMS
2. Accelerator Pedal 7) Remove the accelerator pedal connecting bolt
from accelerator pedal bracket.
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the accelerator cable lock nut from ac-
celerator cable bracket.
3) Separate the accelerator cable from bracket.
4) Remove the accelerator cable end from throttle
cam.
NOTE:
Be careful not to kink the accelerator cable.
SP-00018
(A) 8) Disconnect the grommet from toe board.
NOTE:
From the inside compartment, push the grommet
(A) into hole.
(D)
(B) (C)
SP-00016
(A) Accelerator cable lock nut
(B) Accelerator cable bracket (A)
(C) Accelerator cable
(D) Throttle cam
SP-00008
5) Remove the clip inside engine compartment.
9) Pull out the cable from toe board hole.
10) Disconnect the accelerator cable bushing from
(A) accelerator pedal lever.
(E)
(E) (D)
(A)
(C)
(E)
(B)
SP-00017
(A) Toe board
(B) Accelerator cable SP-00009
(C) To accelerator pedal
(A) Flat tip screwdriver
(D) Brake booster
(E) Clip
6) Remove the instrument panel lower cover from
instrument panel.
SP(H4SO)-3
ACCELERATOR PEDAL
SPEED CONTROL SYSTEMS
11) Disconnect the accelerator cable stopper (A) C: DISASSEMBLY
from accelerator bracket. 1) Remove the clip, and then remove the accelera-
tor pedal lever from accelerator bracket.
(A) 2) Pull out the spring pin, and then remove the ac-
celerator pedal from accelerator pedal lever.
(B)
(A)
(C)
(D)
SP-00010
12) Separate the accelerator cable and accelerator
bracket. (E)
B: INSTALLATION
1) Install in the reverse order of removal.
NOTE:
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo