Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 2 - Engine Section (H4SO) Speed Control System Accelerator Pedal

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Accelerator Pedal


>> Download Accelerator Pedal documenatation <<

Text preview - extract from the document
                                                     ACCELERATOR PEDAL
                                                                                              SPEED CONTROL SYSTEMS

2. Accelerator Pedal                                                7) Remove the accelerator pedal connecting bolt
                                                                    from accelerator pedal bracket.
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the accelerator cable lock nut from ac-
celerator cable bracket.
3) Separate the accelerator cable from bracket.
4) Remove the accelerator cable end from throttle
cam.
NOTE:
Be careful not to kink the accelerator cable.
                                                                                                            SP-00018
                   (A)                                              8) Disconnect the grommet from toe board.
                                                                    NOTE:
                                                                    From the inside compartment, push the grommet
                                                                    (A) into hole.

                                     (D)
             (B)         (C)


                                                     SP-00016

       (A)   Accelerator cable lock nut
       (B)   Accelerator cable bracket                                                                (A)
       (C)   Accelerator cable
       (D)   Throttle cam
                                                                                                            SP-00008
5) Remove the clip inside engine compartment.
                                                                    9) Pull out the cable from toe board hole.
                                                                    10) Disconnect the accelerator cable bushing from
                                                        (A)         accelerator pedal lever.
     (E)
                                           (E) (D)

                                                                                 (A)
                                                         (C)
                               (E)

       (B)

                                                     SP-00017

       (A)   Toe board
       (B)   Accelerator cable                                                                              SP-00009

       (C)   To accelerator pedal
                                                                           (A) Flat tip screwdriver
       (D)   Brake booster
       (E)   Clip

6) Remove the instrument panel lower cover from
instrument panel.




                                                              SP(H4SO)-3
                                       ACCELERATOR PEDAL
SPEED CONTROL SYSTEMS

11) Disconnect the accelerator cable stopper (A)        C: DISASSEMBLY
from accelerator bracket.                               1) Remove the clip, and then remove the accelera-
                                                        tor pedal lever from accelerator bracket.
                               (A)                      2) Pull out the spring pin, and then remove the ac-
                                                        celerator pedal from accelerator pedal lever.

                                                                                       (B)
                                                                       (A)
                                                                                             (C)
                                                                                                         (D)



                                         SP-00010

12) Separate the accelerator cable and accelerator
bracket.                                                                         (E)

B: INSTALLATION
1) Install in the reverse order of removal.
NOTE:



◦ Jabse Service Manual Search 2021 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo