Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 3 - Transmission Automatic Transmission (Diagnostics) Read Diagnostic Trouble Code (DTC)

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
Read Diagnostic Trouble Code (DTC)


>> Download Read Diagnostic Trouble Code (DTC) documenatation <<

Text preview - extract from the document
                      READ DIAGNOSTIC TROUBLE CODE (DTC)
                                                                         AUTOMATIC TRANSMISSION (DIAGNOSTICS)

7. Read Diagnostic Trouble Code (DTC)
A: OPERATION
1. WITHOUT SUBARU SELECT MONITOR

                      Step                                          Check                           Yes             No
1    PERFORM READ DTC.                                Does the AT OIL TEMP warn-           Repair the power Go to step 2.
     1) Warm-up the engine.                           ing light blink at 4 Hz intervals?   supply and ground
     2) Turn the ignition switch to OFF.              NOTE: Blinks every 0.125 (1/8)       circuit. 
     9) Turn the ignition switch to ON.
     10)Move the select lever "2" range.
     11)Move the select lever "1" range.
     12)Move the select lever "2" range.
     13)Move the select lever "3" range.
     14)Move the select lever "D" range.
2    CHECK AT OIL TEMP WARNING LIGHT.                 Does the AT OIL TEMP warn-           The AT system is    Go to step 3.
                                                      ing light blink at 2 Hz intervals?   normal.
                                                      NOTE: Blinks every 0.25 (1/4)
                                                      seconds (until ignition switch is
                                                      turned to OFF).
3    CHECK AT OIL TEMP WARNING LIGHT.                 Is the DTC outputted by the          Inspect the prob-   Go to step 4.
                                                      blink of AT OIL TEMP warning         lem correspond-
                                                      light?                               ing with DTC.
                                                                                           NOTE:
                                                                                           Record all DTCs.
4    CHECK AT OIL TEMP WARNING LIGHT.                 Does the AT OIL TEMP warn-           Repair the AT OIL Calling up the DTC
                                                      ing light remain illuminated?        TEMP warning        again.
                                                                                           light circuit , or Inspect
                                                                                           inhibitor switch,
                                                                                           wiring, TCM, etc.




                                               4AT(H4SO)-19
                           READ DIAGNOSTIC TROUBLE CODE (DTC)
AUTOMATIC TRANSMISSION (DIAGNOSTICS)




◦ Jabse Service Manual Search 2021 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo