Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 3 - Transmission Automatic Transmission Oil Pump Housing
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Oil Pump Housing documenatation <<Text preview - extract from the document OIL PUMP HOUSING
AUTOMATIC TRANSMISSION
34.Oil Pump Housing 13) Place two wooden blocks on the workbench,
and stand the transmission case with its rear end
A: REMOVAL facing down.
1) Remove the transmission assembly from the ve- CAUTION:
hicle. face of the transmission case.
2) Extract the torque converter clutch assembly.
Note that the parking rod and drive pinion protrude
3) Remove the input shaft. from the mating surface.
55mm
(2.17in)
AT-00114 AT-00181
4) Lift-up lever behind the transmission harness 14) Remove the oil pump housing and adjusting
connector and disconnect it from stay. thrust washer.
5) Disconnect inhibitor switch connector from stay.
6) Remove the ATF charger pipe.
7) Remove the ATF cooler inlet and outlet pipes.
8) Separation of torque converter clutch case and
transmission case sections
9) Separate transmission case and extension case
AT-00182
sections. (A) Oil pump housing
10) Remove the reduction drive gear.
11) Remove the reduction driven gear.
12) Loosen the oil pump housing mounting bolts.
AT-01034
4AT-100
OIL PUMP HOUSING
AUTOMATIC TRANSMISSION
B: INSTALLATION 9) Insert the input shaft while turning lightly by hand
1) Secure the oil pump housing with two nuts and and verify the protrusion amount.
the bolt. Normal protrusion A:
Tightening torque: 50 -- 55 mm (1.97 -- 2.17 in)
42 N
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo