Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Forester 1999-2004 Approved Subaru Forester 2004 3 - Transmission Automatic Transmission Transmission Control Device

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document
Transmission Control Device

>> Download Transmission Control Device documenatation <<

Text preview - extract from the document
                             TRANSMISSION CONTROL DEVICE
                                                                                AUTOMATIC TRANSMISSION

38.Transmission Control Device                         12) Remove bolts securing range select lever, then
                                                       remove range select lever, manual plate and park-
A: REMOVAL                                             ing rod.
1) Remove the transmission assembly from the ve-       NOTE:
hicle.                                 oil seal in the case.
2) Extract the torque converter clutch assembly.

3) Remove the input shaft.
4) Lift-up lever behind the transmission harness
connector and disconnect it from stay.
5) Disconnect the air breather hoses. 
6) Disconnect inhibitor switch connector from stay.
7) Wrap vinyl tape around the nipple attached to
the air breather hose.                                                                          AT-00306
8) Remove pitching stopper bracket.
9) Remove the inhibitor switch.                              (A)   Bolt
                                                             (B)   Range select lever
                                                             (C)   Manual plate
                                                             (D)   Parking rod

                                                       13) Remove the detention spring.


10) Remove control valve body assembly. 
11) Pull off the spring pin of manual plate.


                                 TRANSMISSION CONTROL DEVICE

B: INSTALLATION                                           4) Insert spring pin to manual plate.
1) Install detention spring to transmission case.
Tightening torque:
  6 N

◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo