Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual GENERAL INFORMATION SECTION Periodic Maintenance Services MSA5TCD00L41447

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD00L41447 documenatation <<

Text preview - extract from the document

G2260BE1 (SGML)

1-5 [G14A1] PERIODIC MAINTENANCE SERVICES
14. Brake Linings and Drums

14. Brake Linings and Drums
MAINTENANCE INTERVAL
[Number of months or km (miles), whichever occurs first]
Months 3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
1,000
4.8 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180 192
km
1,000
3 7.5 15 22.5 30 37.5 45 52.5 60 67.5 75 82.5 90 97.5 105 112.5 120
miles
I I I I

A: INSPECTION (1) Rotational direction of drum (Forward)
(2) Wheel cylinder
1. REAR DRUM BRAKE (3) Upper shoe return spring
(4) Adjusting lever
1) Remove brake drum, and check that there
(5) Trailing shoe
is no fluid leakage from wheel cylinder. (6) Lower shoe return spring
If there is fluid leakage from wheel cylinder, re- (7) Leading shoe
place it.
2) Inspect brake shoes for damage or deformi- To replace trailing shoe, remove cotter pin.
ties and check brake linings for wear. Clevis pin should also be replaced if worn.
3) Check brake drum for wear, dents or other
CAUTION: damage.
D Always replace both leading and trailing If the inside surface of brake drum is streaked,
brake shoes for the left and right wheels at correct the surface with emery cloth (#200 or
the same time. more). If it is unevenly worn, tapered, or the out-
D When either the left or the right brake as- side surface of brake drum is damaged, correct
sembly is replaced, always replace the lead- or replace it.
ing shoe and trailing shoe of the other.
D The cotter pin, once removed, cannot be Brake drum inner diameter
reused. Standard value: 228.6 mm (9.000 in)
Service limit: 230.6 mm (9.079 in)
Thickness of lining (except back metal)
Standard value: 4.1 mm (0.161 in) If deformation or wear of back plate, shoe, etc.
Service limit: 1.5 mm (0.059 in) is noticeable, replace the affected parts.

B1H0455A G1H0101

26
G2260BE1 (SGML)

PERIODIC MAINTENANCE SERVICES [G14B2] 1-5
14. Brake Linings and Drums

2. PARKING BRAKE (REAR DISC BRAKE) 3) If the deformation or wear of back plate,
Inspect brake linings and drums of both sides shoe, etc. is noticeable, replace them.
of the rear brake at the same time by removing 4) When the shoe return spring tension is ex-
brake drums. cessively weakened, replace it, taking care to
1) Inspect brake shoes for damage or de- identify upper and lower springs.
formation and check brake linings for wear.
B: ADJUSTMENT
CAUTION:
Always replace both primary and secondary 1. REAR DRUM BRAKE
brake shoes for the left and right wheels at The main brake is adjusted automatically, and
the same time. so there is no need to adjust it.
Brake lining thickness excluding back metal 2. PARKING BRAKE (REAR DISC BRAKE)
Standard value: 3.2 mm (0.126 in) For rear disc brake, adjust parking brake after
Wear limit: 1.5 mm (0.059 in) bleeding the air.
1) Remove rear cover (rubber) installed at
back plate.
2) Turn adjuster toward arrow mark (upward)
until it is locked slightly, by using slot-type
screwdriver as shown in illustration.

B1H0456A

2) Check brake drum for wear, dents or other
damage. If the inside surface of brake drum is
streaked, correct the surface with emery cloth
(#200 or more). If it is unevenly worn, tapered, G1H0070
or the outside surface of brake drum is dam-
aged, correct or replace it. 3) Turn back (downward) adjuster 3 to 4
Brake drum inside diameter notches.
Standard value: 170 mm (6.69 in) 4) Install cover (rubber) at original position
Wear limit: 171 mm (6.73 in) correctly.

G1H0103

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo