Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual GENERAL INFORMATION SECTION Periodic Maintenance Services MSA5TCD00L41438

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD00L41438


>> Download MSA5TCD00L41438 documenatation <<

Text preview - extract from the document
                                    G2260BE1 (SGML)



1-5     [G5A0]                    PERIODIC MAINTENANCE SERVICES
5. Engine Oil Filter


5. Engine Oil Filter
                                               MAINTENANCE INTERVAL
                                   [Number of months or km (miles), whichever occurs first]
  Months       3       7.5   15   22.5   30    37.5    45      52.5   60   67.5   75    82.5   90    97.5   105 112.5 120
    1,000
              4.8      12    24    36    48     60     72      84     96   108    120   132    144   156    168   180   192
    km
   1,000
               3       7.5   15   22.5   30    37.5    45      52.5   60   67.5   75    82.5   90    97.5   105 112.5 120
   miles
               R       R     R     R     R      R       R       R     R     R     R      R     R      R     R     R     R


A: REPLACEMENT
1) Remove oil filter with ST.
ST 498547000 OIL FILTER WRENCH




                                                     G1H0072


2) Get a new oil filter and apply a thin coat of
engine oil to the seal rubber.
3) Install oil filter by turning it by hand, being
careful not to damage seal rubber.
4) Tighten more (approximately 2/3 to 3/4 turn)
after the seal rubber contacts the oil pump
case. Do not tighten excessively, or oil may
leak.
5) After installing oil filter, run engine and make
sure that no oil is leaking around seal rubber.
NOTE:
The filter element and filter case are perma-
nently joined; therefore, interior cleaning is not
necessary.
6) Check the engine oil level. 




                                                               10



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo