Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual GENERAL INFORMATION SECTION Pre Delivery Inspection MSA5TCD00L17426<< Back
| HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD00L17426 documenatation <<Text preview - extract from the document
PRE-DELIVERY INSPECTION [G3C0] 1-4
3. Road Test Inspection
3. Road Test Inspection B: STARTING CONDITION OF ENGINE
A: TEST MODE CONNECTOR CHECK POINT
1. Starting condition of engine
1. Check engine light flashing Check that the engine starts quickly and runs
2. Test mode connector disconnection smoothly without any abnormal noise.
1. CHECK THE MIL (CHECK ENGINE LIGHT) WARNING:
FLASHING D Before starting the engine, make sure that
there is nothing which will burn easily be-
NOTE: hind the car and that there is no dry grass
D When ignition switch is turned to ON (engine
near the exhaust pipe.
OFF) or to "START" with the test mode connec- D Do not leave the engine running in a
tor connected, the MIL (check engine light)
closed garage as there is the danger of poi-
blinks at a cycle of 3 Hz. soning from the exhaust gases.
D If engine fails to turn over when the ignition
D For safety's sake, never touch the follow-
switch is set to START, check the spark plugs. ing parts while the engine is operating.
(1) Revolving parts such as the belt, fan,
2. CHECK TEST MODE CONNECTOR DIS- etc.
CONNECTION (2) High-temperature parts such as the ex-
NOTE: haust pipe, radiator, etc.
Disconnect test mode connector. If the MIL (3) Electric system such as the plugs,
(check engine light) illuminates with engine ON, cords, etc.
this indicates that a trouble has occurred. D Be careful not to leave inflammable paper
Check diagnostics for CHECK ENGINE mal- or clothes in the engine compartment.
function indicator light (MIL). NOTE:
The engine has been tested before shipment.
C: OPERATION OF INDICATOR
LIGHTS AND GAUGES
1. Operation of indicator lights
2. Operation of gauges
Check the operation according to the "Owner's
B1H0084A D Perform this inspection with the gear shift le-
ver in the neutral position.
(For automatic transmission models: Set the se-
lect lever in the "P" position.)
D Set the parking brake.
D Do not race the engine excessively.
◦ Jabse Service Manual Search 2021 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo