Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual GENERAL INFORMATION SECTION Pre Delivery Inspection MSA5TCD00L17431<< Back
| HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD00L17431 documenatation <<Text preview - extract from the document
1-4 [G3D1] PRE-DELIVERY INSPECTION
3. Road Test Inspection
D: TACHOMETER, RADIO, ETC. F: WASHER AND WIPERS
CHECK POINT CHECK POINTS
1. Operation of tachometer, radio, etc. 1. Checking of fluid level
1. TACHOMETER 2. Direction and quantity of washer fluid
Race the engine two or three times, and check 3. Operation of wiper and washer
the tachometer's operation.
CAUTION: D Do not operate the washer when the reser-
Do not race the engine more than necessary. voir is empty.
2. RADIO D Before operating the wipers, be sure to
eject washer fluid onto the window. If the
Check the operation according to the "Owner's window is dry, the wipers' operating speed
manual". and angle of operation will be different from
3. CIGARETTE LIGHTER when it is wet.
D If the position at which washer fluid is
To operate, push in the knob completely and ejected is wrong: Using an eyeleteer or simi-
wait for a moment. The lighter will click out of lar tool, adjust the direction of the nozzle, be
holder automatically when ready to use. careful not to damage the nozzle hole.
CAUTION: D Grease, wax, insects or other material on
D To avoid the possibility of being burned, the windshield or the wiper blades results in
do not hold the cigarette lighter in by hand. jerky wiper operation and unclear frontal
This may also cause damage to the lighter view. If you can not get clear view after oper-
heating element. ating the windshield washer or wiper opera-
D When replacing the cigarette lighter knob, tion is jerky, clean the outer surface of the
it is recommended that you use only a genu- windshield and wiper blades with a neutral
ine part. If you use either non-genuine parts detergent.
or any combination of parts different from Wiper blades, windshield and rear window
original knob-and-socket combination, it should be cleaned with sponge, soft cloth or
may cause overheating due to a short cir- mild-abrasive cleaner.
cuit. After cleaning, rinse the windshield and wip-
er blades with clean water. The windshield is
E: LIGHTS AND SWITCHES clear if beads do not form when you rinse the
windshield with water.
1. Visual inspection of lights (installa-
tion, damage, dirty lenses, water inside,
2. Operation of all lights and switches
3. Horn operation
◦ Jabse Service Manual Search 2021 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo