Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual GENERAL INFORMATION SECTION Pre Delivery Inspection MSA5TCD00L17434

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD00L17434 documenatation <<

Text preview - extract from the document

                               G2260BE1 (SGML)



1-4      [G4A0]                  PRE-DELIVERY INSPECTION
4. Post-road Test Inspection


4. Post-road Test Inspection                              B: POWER STEERING FLUID LEVEL
A: AUTOMATIC TRANSMISSION                                 CHECK POINT
FLUID (ATF) LEVEL                                            1. Level of power steering fluid
CHECK POINT                                               The power steering fluid shoud be maintained
   1. Level of ATF                                        at a proper level.
CAUTION:                                                  CAUTION:
Do not fill above the high mark level.                    The available power steering fluid is DEX-
                                                          RON II, IIE or III type automatic transmission
NOTE:                                                     fluid.
If the fluid level is at the lower mark or below on       Be sure to use the recommended fluid.
the "HOT" side, add the recommended ATF to                When power steering fluid is added, be care-
bring the level to the high mark. ATF is added            ful not to allow any dust into the tank.
through the level gauge hole. When the fluid
level has to be checked without time to warm up           Check level as follows:
the AT, check to see that the fluid level is within       1) Check to ensure that the temperature of the
the marks on the "COLD" side. If it is below the          reservoir tank surface is approximately 20

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo