Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ENGINE SECTION Emission Control System & Vacuum Fitting MSA5TCD00L16088

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD00L16088 documenatation <<

Text preview - extract from the document

2-1   [W1A0]                          SERVICE PROCEDURE
1. Front Catalytic Converter


1. Front Catalytic Converter                          7) Separate center exhaust pipe from rear
                                                      exhaust pipe.
A: REMOVAL                                            CAUTION:
1) Set the vehicle on the lift.                       Be careful, exhaust pipe is hot.
2) Disconnect battery ground cable.




                                                                                           B2M3109
                                       G6M0095
                                                      8) Remove bolts which hold front exhaust pipe
3) Disconnect front oxygen (A/F) sensor connec-       onto cylinder heads.
tor.




                                                                                           B2M3200
                                       B2M3439
                                                      9) Remove front exhaust pipe and center exhaust
4) Lift-up the vehicle.                               pipe from hanger bracket.
5) Remove under cover.                                CAUTION:
6) Disconnect connector from rear oxygen sensor       Be careful not to pull down front exhaust pipe
connector.                                            and center exhaust pipe.




                                       B2M3440
                                                                                           B2M3111




                                                  2
                                       SERVICE PROCEDURE                                          [W1B0] 2-1
                                                                                     1. Front Catalytic Converter


10) Separate front catalytic converter from front           3) Tighten bolts which hold front exhaust pipe onto
exhaust pipe.                                               cylinder heads.
NOTE:                                                       Tightening torque:
The rear catalytic converter is integrated with front           18

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo